< Back ×
My Vehicle Change Vehicle
2002 Buick Regal
< Back to View All
Crankshafts, Pistons, Rings & Connecting Rods
- Department
- Brands
- Prices
OEM (Genuine) 2002 Buick Regal Bearing Set
PartNumber: 89017700
Product Specifications- Notes: All Models
- Item Dimensions: 4.2 x 4.2 x 2.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18005399, 89017565, 12537418, 12480819
- Part Description: 2002 Buick Regal Bearing Set
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, Base, Custom, GNX, Gran Sport, Grand National, GS, GSE, Limited, LS, LSE, Olympic Gold Edition, T-Type | 6 Cyl 3.8 L GAS, 6 Cyl 4.1 L GAS
$15.17 MSRP:$24.07You Save: $8.90 (37%)
Sealed Power® Aluminum Connecting Rod Bearing Set for 2002 Buick Regal
PartNumber: 3760AProduct Specifications- Notes: with 0.721in Overall Length;Standard Size; A-Series aluminum bearings
- Housing Bore Max: 60.312
- Housing Bore Min: 60.300
- Oil Clearance Max: 0.076
- Oil Clearance Min: 0.0007"
- Overall Length Max: 18.310
- Package Alert: Pair
- Part Material: A-Series Aluminum
- Size: Standard
- Standard Shaft Max: 2.2495"
- Standard Shaft Min: 2.2487"
- UPC: 614046738232
- Wall Thickness Max: 0.0619"
- Part Description: 2002 Buick Regal Aluminum Connecting Rod Bearing Set
Vehicle Fitment- 2002 Buick Regal | All Trims | 6 Cyl 3.8L
$6.96
FAQ for Rod Bearing Repair
Q: What is the recommended torque for the connecting rod cap bolts?
A:
The recommended torque is 27 Nm (20 ft. lbs.).
By Bob
GM Specialist
02/11/2022Q: What should be noticed when installing the connecting rod bearing?
A:
You should make sure that the connecting rod cap bolt holes and the connecting rod cap mating surfaces are clean and dry.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the connecting rod bearing?
A:
You need to remove the oil pan and the spark plug, position the connecting rod, remove the connecting rod cap bolts, the connecting rod cap and lower connecting rod bearing, and lower connecting rod bearing, install the J 41507 to the connecting rod, push up the connecting rod and piston and access the upper connecting rod bearing, remove the upper connecting rod bearing, wipe the oil, inspect the connecting rod bearings, and measure the bearing clearance.
By Bob
GM Specialist
02/11/2022