< Back ×
My Vehicle Change Vehicle
2002 Buick Regal
< Back to View All
Hoods
- Department
- Prices
OEM (Genuine) 2002 Buick Regal Latch
PartNumber: 10423017
Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 7.6 x 6.3 x 4.4 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10255215
- Part Description: 2002 Buick Regal Latch
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
$35.74 MSRP:$53.93You Save: $18.19 (34%)
OEM (Genuine) 2002 Buick Regal Latch
PartNumber: 20513752
Product Specifications- Other Names: Latch, Lock
- Item Dimensions: 6.3 x 3.2 x 3.1 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal Latch
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Lock Assembly
PartNumber: 20513755
Product Specifications- Notes: All Models
- Item Dimensions: 6.2 x 3.2 x 3.2 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal Lock Assembly
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 6 Cyl 3.8 L GAS
FAQ for Hood Latch Repair
Q: How to install the hood latch?
A:
You need to connect the hood latch release cable and position the hood latch to the marks on the hood latch support bracket. Notice, install the hood latch to center support bracket bolts, adjust the hood, and close the hood.
By Bob
GM Specialist
01/11/2022Q: How to install the hood latch release handle?
A:
You need to install the hood release cable to the hood release handle, the hood release handle to the instrument panel, the bolts to the hood latch release handle, and the instrument panel insulator.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the seal in the plenum to the hood?
A:
You need to open and support the hood, pull the weatherstrip forward and pull the weatherstrip off of the flange, and remove the weatherstrip from the flange.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood latch support?
A:
You need to open the hood, remove the hood latch, the front bumper fascia bracket, the bolts from the hood latch support bracket, and the nut from the hood latch support bracket, and remove the hood latch support bracket.
By Bob
GM Specialist
01/11/2022Q: What should be noticed when removing the hood hinge?
A:
When a hood hold-open device is being removed or installed, you should provide alternate support to avoid the possibility of damage to the vehicle or personal injury.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood hinge?
A:
You need to remove the hood, the hood assists rod, and the hood rear side seals from the hood hinge, loosen the hood hinge to fender bolts, center punches the spot weld, drill out the spot weld, remove the hood hinge to fender bolts and the hood hinge from the fender, and repair the paint on the fender.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the hood latch release handle?
A:
You need to remove the instrument panel insulator, the bolts from the hood latch release handle, the hood release cable from the hood release handle, and the hood release handle from the instrument panel.
By Bob
GM Specialist
01/11/2022Q: How to install the seal in the plenum to the hood?
A:
You need to align the weatherstrip to the flange, press the weatherstrip onto the flange, and close the hood.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the seal in the hood's rear side?
A:
You need to open the hood, remove the rear side hood seal and the rear side hood seal, and clean any adhesive from the pinch-weld flange and motor compartment flange surface.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts to the hood latch support?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022See more FAQs (10)