< Back ×
My Vehicle Change Vehicle
2002 Buick Regal
< Back to View All
Fuel Systems
- Department
- Prices
OEM (Genuine) 2002 Buick Regal Fuel Gauge Sending Unit
PartNumber: 89060197
Product Specifications- Notes: W/O Supercharger;W/Supercharger
- Other Names: Fuel Gauge Sending Unit, Level Sensor
- Item Dimensions: 7.8 x 5.8 x 5.7 inches
- Item Weight: 1.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25317742
- Part Description: 2002 Buick Regal Fuel Gauge Sending Unit
Vehicle Fitment- 2002 Buick Regal | GS, LS, LSE | 6 Cyl 3.8 L GAS
$52.15 MSRP:$98.42You Save: $46.27 (48%)
OEM (Genuine) 2002 Buick Regal Fuel Pump
PartNumber: 19369955
Product Specifications- Notes: W/O Supercharger
- Item Dimensions: 17.2 x 8.6 x 5.8 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 19332109, 25344933, 19177221, 25331861, 25317743
- Part Description: 2002 Buick Regal Fuel Pump
Vehicle Fitment- 2002 Buick Regal | GS, LS, LSE | 6 Cyl 3.8 L GAS
$281.20 MSRP:$530.59You Save: $249.39 (48%)
OEM (Genuine) 2002 Buick Regal Fuel Tank Fuel Pump Module KIT
PartNumber: 19331277
Product Specifications- Notes: W/Supercharger
- Other Names: Fuel Pump, Fuel Pump Assembly, Sending Unit
- Item Dimensions: 16.5 x 8.3 x 5.6 inches
- Item Weight: 2.90 Pounds
- Replaces: 25326814, 25344968, 19177222
- Part Description: 2002 Buick Regal Fuel Tank Fuel Pump Module KIT
Vehicle Fitment- 2002 Buick Regal | GS, GSE | 6 Cyl 3.8 L GAS
FAQ for Fuel Sending Unit Repair
Q: How to install the fuel gauge sender?
A:
You need to install the fuel level sensor to the fuel sender assembly and the fuel sender assembly, tighten the fuel filler cap, connect the negative battery cable, and inspect for fuel leaks.
By Bob
GM Specialist
01/11/2022Q: What is the procedure to inspect for fuel leaks?
A:
The procedure is to turn on the ignition for 2 seconds, turn off the ignition for 10 seconds, turn on the ignition, and inspect for fuel leaks.
By Bob
GM Specialist
01/11/2022Q: What is the procedure to inspect for leaks?
A:
The procedure is to turn on the ignition for 2 seconds, turn off the ignition for 10 seconds, turn on the ignition, and inspect for fuel leaks.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fuel sender assembly?
A:
You need to relieve the fuel system fuel pressure, remove the spare tire cover, the jack, the spare tire, the rear compartment trim panel, the nuts retaining the fuel sender access panel and the fuel sender access panel, disconnect the fuel tank pressure sensor electrical connector and the fuel sender electrical connector, clean the fuel pipes and fuel sender assembly, disconnect the quick-connect fittings, remove the fuel sender retaining ring and the modular fuel sender assembly, clean the fuel sender assembly O-ring sealing surfaces, and inspect the fuel sender assembly O-ring sealing surfaces.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fuel gauge sender?
A:
You need to relieve the fuel system pressure and remove the fuel sender assembly and the fuel level sensor from the fuel sender assembly.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fuel sender access panel retaining nuts?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022See more FAQs (1)