< Back ×
My Vehicle Change Vehicle
2002 Buick Regal
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
Delphi® Fuel Injection Pressure Regulator for 2002 Buick Regal
PartNumber: FP10377Product Specifications- Adjustable: No
- Inlet Port Diameter: 24.0 mm
- Inlet Quantity: 1
- Inlet Type: Push In
- Material: Metal
- Mounting Type: Clamp
- Outlet Quantity: 1
- Outlet Type: Returnless
- UPC: 689604291429
- Part Description: 2002 Buick Regal Fuel Injection Pressure Regulator
Vehicle Fitment- 2002 Buick Regal | All Trims | 6 Cyl 3.8L
$68.18
Walker Products® Fuel Injection Pressure Regulator for 2002 Buick Regal
PartNumber: 255-1068Product Specifications- Notes: Incl.O-Rings
- UPC: 724620071768
- Part Description: 2002 Buick Regal Fuel Injection Pressure Regulator
Vehicle Fitment- 2002 Buick Regal | All Trims | 6 Cyl 3.8L
$41.34
Delphi® Fuel Injection Pressure Regulator for 2002 Buick Regal
PartNumber: FP10238Product Specifications- Adjustable: No
- Inlet Port Diameter: 25.0 mm
- Inlet Quantity: 1
- Inlet Type: Push In
- Material: Metal
- Mounting Type: Clamp
- Outlet Quantity: 1
- Outlet Type: Returnless
- UPC: 689604114940
- Part Description: 2002 Buick Regal Fuel Injection Pressure Regulator
Vehicle Fitment- 2002 Buick Regal | LS | All Engines
$67.63
OEM (Genuine) 2002 Buick Regal Fuel Pressure Regulator
PartNumber: 24506988
Product Specifications- Notes: All Models; 3.8l; Regal
- Other Names: Fuel Pressure Regulator
- Item Dimensions: 3.0 x 2.0 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24503229
- Part Description: 2002 Buick Regal Fuel Pressure Regulator
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, Custom, Gran Sport, GS, GSE, Limited, LS, LSE, Olympic Gold Edition | 6 Cyl 3.8 L GAS
Original Engine Management® Fuel Injection Pressure Regulator for 2002 Buick Regal
PartNumber: FPR5Product Specifications- Adjustable: Yes
- Contents: Includes Mounting Bracket
- Functions: Regulator
- Hardware Included: Yes
- Inlet Quantity: 1
- Mounting Type: Flange
- New or Reman: New
- Nipple Orientation: Angled
- Notes: Includes O-Ring
- Number of Outlets: 1
- OE Part Number: 17113288
- Reference Port Included: No
- UPC: 841266083068
- Part Description: 2002 Buick Regal Fuel Injection Pressure Regulator
Vehicle Fitment- 2002 Buick Regal | All Trims | All Engines
FAQ for Fuel Pressure Regulator Repair
Q: What is the procedure to inspect for leaks?
A:
The procedure is to turn on the ignition for 2 seconds, turn off the ignition for 10 seconds, turn on the ignition, and inspect for fuel leaks.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fuel rail hold-down bolts?
A:
The recommended torque is 10 Nm (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fuel rail assembly?
A:
You need to relieve the fuel pressure from the fuel system, clean the fuel rail assembly and connections, disconnect the fuel feed and return pipes, disconnect the vacuum line from the fuel pressure regulator, remove the ignition coil wires, disconnect the 6 injector electrical connectors, remove the fuel rail hold-down bolts and the fuel rail.
By Bob
GM Specialist
01/11/2022Q: What is the relief procedure for the fuel pressure?
A:
You need to disconnect the negative battery cable, remove the fuel injector sight shield, loosen the fuel filler cap to relieve tank vapor pressure, connect the J 34730-1A to the fuel pressure connection, install the bleed hose into an approved container and open the valve to bleed the system pressure and drain any fuel remaining in the fuel pressure gauge into an approved container.
By Bob
GM Specialist
29/10/2022Q: How to install the fuel pressure regulator?
A:
You need to install the new O-rings on the fuel pressure regulator, the regulator backup O-ring, the regulator O-ring large, the regulator O-ring small, the fuel pressure regulator, and the snap ring, connect the vacuum line to the fuel pressure regulator, tighten the fuel fill cap, connect the negative battery cable, inspect for leaks, and install the fuel injector sight shield.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the fuel pressure gauge?
A:
You need to place the fuel pressure gage bleed hose into an approved container, bleed the fuel system pressure, place a shop towel under the fuel pressure gage to catch any remaining fuel spillage, remove the fuel pressure gage, drain any fuel remaining in the fuel pressure gage, inspect for a leak, and install the cap on the fuel pressure connection and the fuel injector sight shield.
By Bob
GM Specialist
29/10/2022Q: What is the removal procedure for the fuel pressure regulator?
A:
You need to relieve the fuel pressure, clean any dirt, remove the vacuum line and the snap ring, remove the fuel pressure regulator, the regulator O-ring small, the regulator O-ring large, and the regulator O-ring back up, and cover the fuel pressure regulator housing to prevent contamination from entering the fuel system.
By Bob
GM Specialist
29/10/2022Q: What is the installation procedure for the fuel pressure gage?
A:
You need to remove the fuel injector sight shield, install the J 34730-1A to the fuel pressure service connection, turn on the ignition, place the bleed hose of the fuel pressure gage, open the bleed valve on the fuel pressure gage to bleed the air from the fuel pressure gage, command the fuel pump on, close the bleed valve on the fuel pressure gage, and inspect for fuel leaks.
By Bob
GM Specialist
29/10/2022See more FAQs (3)