< Back ×
My Vehicle Change Vehicle
2002 Buick Regal
< Back to View All
Driveline, Axles & 4WD
- Department
- Prices
OEM (Genuine) 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft Tri-Pot
PartNumber: 26073381
Product Specifications- Notes: W/O Supercharger; All Models; 3.8l; Right; W/O Supercharger
- Location: Passenger Side
- Item Dimensions: 7.6 x 7.0 x 6.7 inches
- Item Weight: 7.70 Pounds
- Part Description: 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft Tri-Pot
Vehicle Fitment- 2002 Buick Regal | LS, LSE | 6 Cyl 3.8 L GAS
$185.01 MSRP:$578.46You Save: $393.45 (69%)
OEM (Genuine) 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft Tri-Pot
PartNumber: 26073376
Product Specifications- Notes: W/Supercharger; All Models; 3.8l; Left; W/Supercharger
- Location: Driver Side
- Item Dimensions: 8.7 x 6.9 x 7.2 inches
- Item Weight: 8.20 Pounds
- Replaces: 26073378
- Part Description: 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft Tri-Pot
Vehicle Fitment- 2002 Buick Regal | GS, GSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft Tri-Pot
PartNumber: 26073382
Product Specifications- Notes: W/O Supercharger; All Models; 3.8l; Left; W/O Supercharger
- Location: Driver Side
- Item Dimensions: 7.7 x 7.0 x 6.5 inches
- Item Weight: 8.00 Pounds
- Part Description: 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft Tri-Pot
Vehicle Fitment- 2002 Buick Regal | LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft Tri-Pot
PartNumber: 26073375
Product Specifications- Notes: All Models; 3.8l; Right; W/Supercharger
- Item Dimensions: 8.7 x 6.9 x 7.4 inches
- Item Weight: 6.40 Pounds
- Part Description: 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft Tri-Pot
Vehicle Fitment- 2002 Buick Regal | GS, GSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft Tri-Pot
PartNumber: 26073379Product Specifications- Notes: W/Supercharger
- Location: Passenger Side
- Other Names: Inner CV Joint, Inner Joint
- Item Dimensions: 8.7 x 6.7 x 7.1 inches
- Item Weight: 7.30 Pounds
- Part Description: 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft Tri-Pot
Vehicle Fitment- 2002 Buick Regal | GS, GSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft C/V
PartNumber: 19122437
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: CV Joint, Outer CV Joint, Outer Joint
- Item Dimensions: 7.5 x 7.2 x 6.7 inches
- Item Weight: 6.80 Pounds
- Replaces: 26044410, 26045070
- Part Description: 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft C/V
Vehicle Fitment- 2002 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft C/V
PartNumber: 19148843
Product Specifications- Notes: All Models; 3.8l
- Other Names: CV Joint, Outer Joint, Outer Joint Assembly
- Item Dimensions: 8.6 x 6.7 x 7.1 inches
- Item Weight: 6.40 Pounds
- Replaces: 26044408, 26075595
- Part Description: 2002 Buick Regal Joint Kit, Front Wheel Drive Shaft C/V
Vehicle Fitment- 2002 Buick Regal | 25th Anniversary Edition, GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
FAQ for Cv Joint Repair
Q: What is the disassembly procedure for the wheel drive shaft inner joint and seal?
A:
You need to disconnect the swage ring, remove and discard the large seal retaining clamp, separate the inboard seal, slide the seal away, remove the housing, spread the spacer ring, slide the spacer ring and the tripot joint spider back, remove the half shaft bar retaining ring, slide tripot joint spider assembly, clean the tripot joint spider assembly and the housing, remove all traces of old grease, any contaminates, trilobal tripot bushing and the spacer ring and the seal, and inspect the inboard seal, the tripot joint spider assembly, the housing and the trilobal tripot bushing.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the seal retaining clamp?
A:
The recommended torque is 174 Nm (130 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the procedure to align the swage ring?
A:
You need to place the top half of J 41048 on the lower half of J41048, insert the bolts, and tighten the bolts by hand until snug.
By Bob
GM Specialist
01/11/2022