< Back ×
My Vehicle Change Vehicle
2002 Buick Regal
< Back to View All
A/C & Heating
- Department
- Prices
OEM (Genuine) 2002 Buick Regal Hose & Tube Assembly
PartNumber: 19169348
Product Specifications- Notes: 3.8l; Regal
- Item Dimensions: 31.9 x 4.7 x 4.6 inches
- Item Weight: 1.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10422442, 10348122
- Part Description: 2002 Buick Regal Hose & Tube Assembly
Vehicle Fitment- 2002 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal AC Hose
PartNumber: 10308247
Product Specifications- Notes: Accumulator; Regal
- Other Names: AC Hose, AC Line, Accumulator Tube, Hose
- Item Dimensions: 22.5 x 11.8 x 18.4 inches
- Item Weight: 1.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal AC Hose
Vehicle Fitment- 2002 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Tube Asm-A/C Evaporator
PartNumber: 10339261
Product Specifications- Other Names: AC Line, AC Tube, Evaporator Tube
- Item Dimensions: 35.7 x 17.2 x 15.3 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10295391, 10445946, 10433079
- Part Description: 2002 Buick Regal Tube Asm-A/C Evaporator
Vehicle Fitment- 2002 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Regal Tube, Blower Motor Cooling
PartNumber: 52487082
Product Specifications- Other Names: Blower Motor Tube, Hose, Tube
- Item Dimensions: 6.7 x 6.3 x 1.0 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Regal Tube, Blower Motor Cooling
Vehicle Fitment- 2002 Buick Regal | GS, GSE, LS, LSE | 6 Cyl 3.8 L GAS
FAQ for A/C Hose Repair
Q: How to install the evaporator tube?
A:
You need to install the new O-ring seals onto the evaporator tube, connect the evaporator inlet tube and the evaporator inlet tube, install the evaporator outlet tube and the evaporator block fitting bolt, tighten the evaporator tube nut, install the accumulator clip, the vacuum brake booster, the cross vehicle brace, and the air cleaner assembly, evacuate and recharge the A/C system, and Leak test the fittings of the component.
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the condenser tube?
A:
You need to recover the refrigerant, remove the air cleaner assembly, the cross vehicle brace, the vacuum brake booster, and the accumulator tube clip, raise and support the vehicle, remove the lower radiator air baffle, loosen the condenser tube nut, disconnect the condenser tube, lower the vehicle, disconnect the A/C refrigerant pressure sensor electrical connector, loosen the evaporator inlet tube nut, disconnect the evaporator tube, and remove the condenser tube, the O-ring and the A/C pressure sensor.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the evaporator inlet tube nut?
A:
The recommended torque is 27 Nm (20 lb-ft).
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the accumulator tube nut at the accumulator?
A:
The recommended torque is 47 Nm (35 lb-ft).
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the evaporator tube?
A:
You need to recover the refrigerant, remove the air cleaner assembly, the cross vehicle brace, the vacuum brake booster, and the accumulator clip, disconnect the evaporator tube nut and the evaporator tube, remove the evaporator tube, disconnect the evaporator inlet tube, and remove the O-ring and discard.
By Bob
GM Specialist
28/10/2022Q: What is the recommended torque for the A/C compressor hose nut?
A:
The recommended torque is 33 Nm (24 lb-ft).
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the accumulator tube?
A:
You need to recover the refrigerant, remove the air cleaner assembly, the cross vehicle brace, the vacuum brake booster, and the accumulator clip, loosen the accumulator tube nut, disconnect the accumulator tube, remove the accumulator tube to evaporator core block fitting bolt, disconnect the accumulator tube, remove the accumulator tube and the O-ring seal and discard.
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the compressor hose assembly?
A:
You need to recover the refrigerant, remove the left front fender upper diagonal brace, the air cleaner assembly, and the A/C compressor hose nut, disconnect the A/C compressor hose, remove the A/C compressor hose nut, and the A/C compressor hose, raise and support the vehicle, remove the lower air deflector, the A/C compressor hose nut and the A/C compressor hose.
By Bob
GM Specialist
28/10/2022See more FAQs (3)