Notes: Temperature 180 Degrees; Alternate Temperature
Flange Diameter (Without Seal) (in): 1.725
Freight Class: 70
Height from Flange to Bottom (in): 0.85
Height from Flange to Top of Bridge (in): 0.87
Temperature (F): 180 Degrees
UPC: 333420549980
Part Description: 2002 Buick Park Avenue Superstat™ Premium Engine Coolant Thermostat
More Info
Vehicle Fitment
2002 Buick Park Avenue | All Trims | 6 Cyl 3.8L
FAQ for Thermostat Repair
Q: What is the recommended torque for the thermostat housing bolts?
A:
The recommended torque is 20 Nm (15 ft. lbs.).
By Bob
GM Specialist
01/11/2022
Q: What kind of special tools will be required when serving the thermostat?
A:
J38185 Hose Clamp Pliers.
By Bob
GM Specialist
01/11/2022
Q: How to install the thermostat?
A:
You need to install the thermostat, the thermostat housing, and a new gasket, the thermostat housing bolts, install the inlet radiator hose and clamp, then refill the cooling system, and install the engine cover.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the water pump?
A:
You need to install the Water Pump on the engine, install the water pump mounting bolts, install the water pump pulley and bolts, then install the drive belt and fill the cooling system.
Q: How to remove the coolant recovery reservoir?
A:
You need to drain the coolant, disconnect the air cleaner assembly, position it out of the way, then remove the Coolant Reservoir nuts and bolts, remove the coolant hose, and remove the coolant reservoir.
Q: How to install the cooling fan motor- electric?
A:
You need to install the Cooling Fan Motor to the shroud, install the cooling fan motor retaining bolts, install the cooling fan to the motor shaft, then install the cooling fan retaining nut to the motors, and install the electric cooling fan.