2002 Buick Park Avenue Seat Cushion Pad

You should align the cover on the cushion, engage the hook and the loop, work the cover over the sides of the cushion and latch the J-channel to the seat cushion frame, then install the 6 push-in retainers to the bottom side of the seat cushion frame, and install the seat cushion.

You should install the seat back foam cushion (if removed), the seat trim cover over the foam cushion, remove the wrinkles from the trim cover, then install new hog rings to secure the trim cover to the seat back, install the rear armrest, and the rear seatback.

You need to remove the rear seat cushion, and the 6 push-in retainers, release the J-channel from the seat frame, pull the cover upward from the cushion, then remove the cover and then the cushion.

You need to remove the rear seat back, the rear armrest, the hog rings the seat trim cover, separate the seat trim cover from the seat cushion, then remove the seat trim cover and seat back foam cushion (if necessary).

You need to remove the front seat assembly, the front seat side airbag, the head restraint, and the map pocket panel, next release the attachment hooks from the back of the frame and the bottom of the frame, disconnect the seat heater electrical connector, release and remove the rear seat belt height adjuster trim cover, remove the height adjuster closeout ring, then remove the 3 screws and remove the height adjuster front trim cover, and work the cover and pad up on the seat back frame, remove the lower seat belt retractor trim cover, remove the seat belt retractor assembly retaining nut and remove the retractor assembly, feed the lower seat belt retractor assembly and remove the cover and pad, ultimately remove the seatback cover from the seatback cushion.