< Back ×
My Vehicle Change Vehicle
2002 Buick Park Avenue
< Back to View All
Power Steering Pumps
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 2002 Buick Park Avenue
PartNumber: 20-542Product Specifications- Notes: For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;In-Line filter available;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 2002 Buick Park Avenue Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 2002 Buick Park Avenue | All Trims | All Engines
$61.69
OEM (Genuine) 2002 Buick Park Avenue PUMP KIT, P/S
PartNumber: 19369067
Product Specifications- Notes: Park Avenue
- Other Names: Power Steering Pump
- Item Dimensions: 8.2 x 5.3 x 5.3 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26086070
- Part Description: 2002 Buick Park Avenue PUMP KIT, P/S
Vehicle Fitment- 2002 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
FAQ for Power Steering Pump Repair
Q: How to remove the power steering pump flow control valve (on vehicle)?
A:
You need to install a drain pan under the vehicle, remove the power steering pressure hose from the flow control valve, next remove the power steering flow control valve assembly from the power steering pump, and remove the power steering flow control spring.
By Bob
GM Specialist
01/11/2022Q: How to remove the power steering pulley?
A:
You need to remove the drive belt, and the power steering pump, and remove the power steering pulley from the power steering pump using J25034-C.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering pump retaining bolts?
A:
The recommended torque is 27 Nm (20 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering pressure hose?
A:
The recommended torque is 27 Nm (20 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required in the replacement of the power steering pump?
A:
J24319-B Steering Linkage and Tie Rod Puller.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the outer tie rod retaining nut?
A:
The recommended torque is 75 Nm (55 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: How to disassemble the power steering pump flow control valve-off vehicle (CB series)?
A:
You need to remove the O-ring union fitting from the hydraulic pump housing assembly, next remove the O-ring seal from the O-ring union fitting, then remove the control valve assembly, and the flow control spring.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to assemble the power steering pump flow control valve-off vehicle (CB series)?
A:
You should install the flow control spring to the hydraulic pump housing assembly, install the control valve assembly, lubricate the O-ring seal with power steering fluid, install the O-ring seal onto the O-ring union fitting, and install the O-ring union fitting into the hydraulic pump housing assembly.
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required in the replacement of the power steering pulley?
A:
J25034-C Pulley Remover, J25033-C Pulley installer.
By Bob
GM Specialist
01/11/2022See more FAQs (4)