< Back ×
My Vehicle Change Vehicle
2002 Buick Park Avenue
< Back to View All
Fuel Systems
- Department
- Brands
- Prices
Delphi® Fuel Injection Pressure Regulator for 2002 Buick Park Avenue
PartNumber: FP10377Product Specifications- Adjustable: No
- Inlet Port Diameter: 24.0 mm
- Inlet Quantity: 1
- Inlet Type: Push In
- Material: Metal
- Mounting Type: Clamp
- Outlet Quantity: 1
- Outlet Type: Returnless
- UPC: 689604291429
- Part Description: 2002 Buick Park Avenue Fuel Injection Pressure Regulator
Vehicle Fitment- 2002 Buick Park Avenue | All Trims | 6 Cyl 3.8L
$68.18
Walker Products® Fuel Injection Pressure Regulator for 2002 Buick Park Avenue
PartNumber: 255-1068Product Specifications- Notes: Incl.O-Rings
- UPC: 724620071768
- Part Description: 2002 Buick Park Avenue Fuel Injection Pressure Regulator
Vehicle Fitment- 2002 Buick Park Avenue | All Trims | 6 Cyl 3.8L
$41.34
OEM (Genuine) 2002 Buick Park Avenue Fuel Pressure Regulator
PartNumber: 19245529
Product Specifications- Notes: Park Avenue; W/O Supercharger
- Other Names: Fuel Pressure Regulator
- Item Dimensions: 4.4 x 3.4 x 2.0 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12583236, 17113660, 89060418
- Part Description: 2002 Buick Park Avenue Fuel Pressure Regulator
Vehicle Fitment- 2002 Buick Park Avenue | Base | 6 Cyl 3.8 L GAS
$77.29 MSRP:$145.84You Save: $68.55 (48%)
Delphi® Fuel Injection Pressure Regulator for 2002 Buick Park Avenue
PartNumber: FP10238Product Specifications- Adjustable: No
- Inlet Port Diameter: 25.0 mm
- Inlet Quantity: 1
- Inlet Type: Push In
- Material: Metal
- Mounting Type: Clamp
- Outlet Quantity: 1
- Outlet Type: Returnless
- UPC: 689604114940
- Part Description: 2002 Buick Park Avenue Fuel Injection Pressure Regulator
Vehicle Fitment- 2002 Buick Park Avenue | Base | All Engines
$67.63OEM (Genuine) 2002 Buick Park Avenue Fuel Pressure Regulator
PartNumber: 24506988
Product Specifications- Notes: Park Avenue; W/Supercharger
- Other Names: Fuel Pressure Regulator
- Item Dimensions: 3.0 x 2.0 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24503229
- Part Description: 2002 Buick Park Avenue Fuel Pressure Regulator
Vehicle Fitment- 2002 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
Original Engine Management® Fuel Injection Pressure Regulator for 2002 Buick Park Avenue
PartNumber: FPR5Product Specifications- Adjustable: Yes
- Contents: Includes Mounting Bracket
- Functions: Regulator
- Hardware Included: Yes
- Inlet Quantity: 1
- Mounting Type: Flange
- New or Reman: New
- Nipple Orientation: Angled
- Notes: Includes O-Ring
- Number of Outlets: 1
- OE Part Number: 17113288
- Reference Port Included: No
- UPC: 841266083068
- Part Description: 2002 Buick Park Avenue Fuel Injection Pressure Regulator
Vehicle Fitment- 2002 Buick Park Avenue | All Trims | All Engines
FAQ for Fuel Pressure Regulator Repair
Q: What should be noted before removing the fuel rail assembly?
A:
When servicing the fuel rail assembly, precautions must be taken to prevent dirt and other contaminants from entering the fuel passages. The fittings should be capped, and the holes should be plugged during servicing. And always maintain cleanliness when servicing fuel system components.
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required in the replacement of the fuel rail assembly?
A:
J43013 Fuel Injector Remover.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the fuel rail hold-down bolts?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required in the replacement of the fuel pressure gauge?
A:
J34730-1A Fuel Pressure Gage.
By Bob
GM Specialist
29/10/2022Q: How to relieve the fuel system pressure?
A:
You need to disconnect the negative battery terminal, remove the fuel injector sight shield and the fuel pressure connection cap, wrap a shop towel around the fuel pressure connection, then install the bleed hose into an approved container and open the valve to bleed the system pressure and drain any fuel remaining in the fuel pressure gauge into an approved container.
By Bob
GM Specialist
29/10/2022Q: How to install the fuel pressure gage?
A:
You need to remove the fuel injector sight shield, install the J 34730-1A to the fuel pressure service connection, located on the fuel rail, then turn ON the ignition, place the bleed hose of the fuel pressure gage into an approved gasoline container, bleed the air from the fuel pressure gage, command the fuel pump ON with a scan tool, then close the bleed valve on the fuel pressure gage, lastly inspect for fuel leaks.
By Bob
GM Specialist
29/10/2022Q: What kind of special tools will be required for the fuel system pressure relief?
A:
J34730-1A Fuel Pressure Gauge.
By Bob
GM Specialist
29/10/2022Q: What should be noticed before installing the fuel pressure regulator?
A:
You should not use compressed air to test or clean a fuel pressure regulator as damage to the fuel pressure regulator may result. Clean the fuel pressure regulator filter screen with gasoline if necessary. And do not immerse the fuel pressure regulator in a solvent bath to prevent damage to the fuel pressure regulator.
By Bob
GM Specialist
29/10/2022See more FAQs (3)