< Back ×
My Vehicle Change Vehicle
2002 Buick Park Avenue
< Back to View All
Light Relays, Switches & Control Modules
- Department
- Brands
- Prices
OEM (Genuine) 2002 Buick Park Avenue Theft Deterrent Module Assembly
PartNumber: 10355946
Product Specifications- Notes: Park Avenue
- Item Dimensions: 4.2 x 4.2 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 09383080, 10303382, 16266469, 9383080, 16265419
- Part Description: 2002 Buick Park Avenue Theft Deterrent Module Assembly
Vehicle Fitment- 2002 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
$154.58 MSRP:$306.74You Save: $152.16 (50%)
Cardone Reman® Remanufactured Body Control Computer for 2002 Buick Park Avenue
PartNumber: 73-4856Product Specifications- Notes: with OE # 16198854;with OE # 16267549;with OE # 16264856;Units must be flashed ON the vehicle.Vehicle specific on-car programming must be performed AFTER install to prevent drivability issues
- Connector/Terminal Configuration: Pin/Male; Pin/Male
- Module Housing Material: Plastic
- Product Condition: Remanufactured
- Removable PROM: No
- Terminal Quantity: 32;24
- Part Description: 2002 Buick Park Avenue Remanufactured Body Control Computer
Vehicle Fitment- 2002 Buick Park Avenue | All Trims | All Engines
$99.10
OEM (Genuine) 2002 Buick Park Avenue Module Asm-Body Control
PartNumber: 9385329
Product Specifications- Notes: Park Avenue
- Other Names: Body Control Module
- Item Dimensions: 9.9 x 6.6 x 3.7 inches
- Item Weight: 1.00 Pounds
- Part Description: 2002 Buick Park Avenue Module Asm-Body Control
Vehicle Fitment- 2002 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Park Avenue Headlight Automatic Control Module Assembly
PartNumber: 25628664
Product Specifications- Notes: Auto Lamp Control; Park Avenue
- Other Names: Module, Sentinel Module
- Item Dimensions: 8.9 x 5.0 x 3.2 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Park Avenue Headlight Automatic Control Module Assembly
Vehicle Fitment- 2002 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Park Avenue Rear Object Alarm Module Assembly
PartNumber: 25750801
Product Specifications- Notes: Reverse Sensing System
- Other Names: Module
- Item Dimensions: 6.4 x 5.5 x 2.8 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Park Avenue Rear Object Alarm Module Assembly
Vehicle Fitment- 2002 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick Park Avenue Instrument Panel Lamp Dimmer Assembly
PartNumber: 25629373
Product Specifications- Notes: Interior Lamp Cntrl
- Other Names: Module
- Item Dimensions: 4.3 x 4.3 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick Park Avenue Instrument Panel Lamp Dimmer Assembly
Vehicle Fitment- 2002 Buick Park Avenue | Base, Ultra | 6 Cyl 3.8 L GAS
FAQ for Body Control Module Repair
Q: What is the installation procedure for the instrument panel module?
A:
The procedure is to connect the electrical connectors to the IPM, install the IPM into the retainer on the bracket, close the instrument panel compartment, then connect the negative battery cable.
By Bob
GM Specialist
01/11/2022Q: What should be noticed before setting up the body control module (BCM)?
A:
The airbag indicator light may remain ON after the BCM module is replaced, and during the programming procedure for the BCM, until after the procedure is completed and the ignition key is cycled OFF and ON.
By Bob
GM Specialist
01/11/2022Q: How to remove the body control module?
A:
You need to remove the right closeout/insulator panel, remove the body control module, then disconnect the electrical connector.
By Bob
GM Specialist
01/11/2022Q: How to remove the instrument panel module?
A:
You need to disconnect the negative battery cable, open and lower the instrument panel compartment, pull down to remove the instrument panel module (IPM), then disconnect the electrical connectors from the IPM.
By Bob
GM Specialist
01/11/2022Q: What is the installation procedure for the body control module?
A:
The procedure is to connect the electrical connector to the body control module, install the module to the mounting bracket, install the right closeout/insulator panel, and reprogram the body control module.
By Bob
GM Specialist
01/11/2022