< Back ×
My Vehicle Change Vehicle
2002 Buick LeSabre
< Back to View All
Wheel Hubs, Bearings & Seals
- Department
- Brands
- Prices
OEM (Genuine) 2002 Buick LeSabre Front Hub
PartNumber: 19259596
Product Specifications- Item Dimensions: 8.5 x 7.1 x 7.0 inches
- Item Weight: 11.70 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 19433930
- Part Description: 2002 Buick LeSabre Front Hub
Vehicle Fitment- 2002 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
$219.54 MSRP:$414.26You Save: $194.72 (48%)
FAG® Front Wheel Bearing and Hub Assembly for 2002 Buick LeSabre
PartNumber: 102026Product Specifications- Notes: FAG Global# 102026; ABS Cable Included
- Hub Flange Mount Hole Quantity: 3
- Number of Bolt Holes: 3
- Number of Hub Bolts: 5
- UPC: 670774103063
- Part Description: 2002 Buick LeSabre Front Wheel Bearing and Hub Assembly
Vehicle Fitment- 2002 Buick LeSabre | All Trims | All Engines
$109.31
OEM (Genuine) 2002 Buick LeSabre Hub & Bearing
PartNumber: 7470555
Product Specifications- Notes: Bonneville, Lesabre
- Location: Driver Side; Passenger Side
- Item Dimensions: 7.2 x 7.1 x 8.6 inches
- Item Weight: 8.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick LeSabre Hub & Bearing
Vehicle Fitment- 2002 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
FAQ for Wheel Bearing Repair
Q: What should be noticed when you install the brake shield and the wheel bearing/hub to the lower control arm?
A:
You will need to be careful not to drop the hub and the bearing, as they could be damaged.
By Bob
GM Specialist
01/11/2022Q: What components' rust and foreign material should be cleaned?
A:
You can clean the rust and foreign material from the following components to allow proper seating of the bearing into the knuckle: the knuckle mounting face, the bore, and the chamber.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the wheel bearing/hub bolts?
A:
The recommended torque is 70 Nm (52 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What's the installation procedure for the rear wheel bearing/hub?
A:
The installation procedure is to install the brake shield and the wheel bearing/hub to the lower control arm, install the wheel bearing/hub retaining bolts, connect the wheel bearing/hub electrical connector, install the brake rotor, the tire, and wheel, then lower the vehicle.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the drive axle nut?
A:
The recommended torque is 160 Nm (118 ft. lbs.).
By Bob
GM Specialist
01/11/2022