Notes: Temperature 180 Degrees; Alternate Temperature
Flange Diameter (Without Seal) (in): 1.725
Freight Class: 70
Height from Flange to Bottom (in): 0.85
Height from Flange to Top of Bridge (in): 0.87
Temperature (F): 180 Degrees
UPC: 333420549980
Part Description: 2002 Buick LeSabre Superstat™ Premium Engine Coolant Thermostat
More Info
Vehicle Fitment
2002 Buick LeSabre | All Trims | 6 Cyl 3.8L
FAQ for Thermostat Repair
Q: What's the installation procedure for the thermostat?
A:
The installation procedure is to install the thermostat, the thermostat housing, and a new gasket, install the thermostat housing bolts, the inlet radiator hose and clamp, refill the cooling system and install the engine cover.
By Bob
GM Specialist
01/11/2022
Q: What's the recommended torque for the thermostat housing bolts?
A:
The recommended torque is 20 Nm (15 ft. lbs.).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What's the proper way to remove the upper tie bar?
A:
The proper way is to remove the headlamp/fascia panel support bracket fasteners, the headlamp/fascia panel support brackets, the Radiator support brackets, the air cleaner assembly, the upper tie bar fasteners, and the upper tie bar.
Q: How do you remove the electric cooling fan motor?
A:
You can remove the electric cooling fan, the fan blade retaining nut, the fan blade, the Cooling Fan Motor retaining screws, and the cooling fan motor.
Q: What's the removal procedure for the outlet radiator hose?
A:
The removal procedure is to drain the engine coolant, loosen and move the outlet Radiator Hose clamp at the radiator with the J 38185, remove the outlet radiator hose from the radiator, loosen and move the outlet radiator hose clamp at the engine with the J 38185, then remove the outlet radiator hose from the engine.