Part Description: 2002 Buick LeSabre Parking Brake Cable
More Info
Vehicle Fitment
2002 Buick LeSabre | All Trims | All Engines
FAQ for Parking Brake Cable Repair
Q: What's the proper way to install the intermediate park brake cable?
A:
The proper way is to connect the intermediate park brake cable to the equalizer, connect the right rear parking brake cable to the intermediate park brake cable, insert the intermediate park brake cable into the cable retaining bracket and lock the intermediate park brake cable into place, connect the front of the intermediate park brake cable to the park brake cable connector, install the front park brake cable to the cable guides, lower the vehicle, cycle the park brake pedal 1 to 2 times to ensure that the park brake cable retainers are seated.
By Bob
GM Specialist
02/11/2022
Q: What tools do I need to depress the locking tabs on the left park brake cable?
A:
You can use J37043 to depress the locking tabs on the left park brake cable.
By Bob
GM Specialist
02/11/2022
Q: What should be done before removing the intermediate park brake cable?
A:
You will need to raise and support the vehicle.
By Bob
GM Specialist
02/11/2022
Q: What's the recommended torque for the left park brake cable guide bolt?
A:
The recommended torque is 24 Nm (18 ft. lbs.).
By Bob
GM Specialist
02/11/2022
Q: What should be done before removing the left rear park brake cable?
A:
You will need to raise and support the vehicle.
By Bob
GM Specialist
02/11/2022
FAQ for Other Repair Info
Q: What's the proper way to remove the power steering pressure hose?
A:
The proper way is to raise and support the vehicle, remove the steering gear heatshield, install a drain pan under the vehicle, remove the Power Steering Hose retainer from the engine frame at gear, remove the power steering pressure hose from the power steering gear, remove the power steering pressure hose from the power steering pump and remove the power steering pressure hose.
Q: What should be done before removing the vacuum booster attaching nuts from the brake pedal assembly?
A:
You will need to remove the vacuum Brake Booster pushrod from the brake pedal.
Q: Can I use used copper brake hose gaskets?
A:
No, you cannot. You must use new copper Brake Hose gaskets.