< Back ×
My Vehicle Change Vehicle
2002 Buick LeSabre
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
Dorman® Plastic Intake Manifold for 2002 Buick LeSabre
PartNumber: 615-180Product Specifications- Notes: Gaskets Included
- Air Conditioning Compressor Mount: No
- Alternator Mount: No
- Color: Black
- EGR Ready: Yes
- Gasket or Seal Included: Yes
- Grade Type: Regular
- Heated Choke Port: No
- High-Riser: No
- Intake Manifold Material: Plastic
- Manifold Height: 6.5"
- Material: Plastic
- OE Part Number: 12537425, 24506013, 89017272, 89017274
- Plenum Style: Single Plane
- Port Outlet Dimensions: 36 x 45 mm
- Port Quantity: 6
- UPC: 019495033936
- Part Description: 2002 Buick LeSabre Plastic Intake Manifold
Vehicle Fitment- 2002 Buick LeSabre | All Trims | 6 Cyl 3.8L
$92.72
Dorman® Aluminum Intake Manifold for 2002 Buick LeSabre
PartNumber: 615-280Product Specifications- Air Conditioning Compressor Mount: No
- Alternator Mount: No
- Color: Silver
- EGR Ready: No
- Gasket or Seal Included: No
- Grade Type: Regular
- Heated Choke Port: No
- High-Riser: No
- Intake Manifold Material: Aluminum
- Manifold Height: 5"
- Material: Aluminum
- OE Part Number: 24508923, 19417844
- Plenum Style: Single Plane
- Port Quantity: 6
- UPC: 019495095071
- Part Description: 2002 Buick LeSabre Aluminum Intake Manifold
Vehicle Fitment- 2002 Buick LeSabre | All Trims | 6 Cyl 3.8L
OEM (Genuine) 2002 Buick LeSabre Intake Plenum
PartNumber: 89017272
Product Specifications- Notes: Lesabre
- Other Names: Intake Manifold, Intake Plenum
- Item Dimensions: 24.5 x 14.5 x 7.7 inches
- Item Weight: 8.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick LeSabre Intake Plenum
Vehicle Fitment- 2002 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick LeSabre Intake Manifold
PartNumber: 19417844
Product Specifications- Notes: Bonneville, Lesabre; W/O Supercharger
- Other Names: Intake Manifold
- Item Dimensions: 6.2 x 26.3 x 13.7 inches
- Item Weight: 12.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 24505728, 24508923
- Part Description: 2002 Buick LeSabre Intake Manifold
Vehicle Fitment- 2002 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
FAQ for Intake Manifold Repair
Q: What are the important procedures you should complete to install the manifold?
A:
You should clean the cylinder block, heads, and the intake manifold sealing surface of all oil with a suitable solvent, apply a GM-approved sealer to the ends of the intake manifold seals, and clean any adhesive compound from the intake manifold bolts and the bolt holes then apply thread locking compound GM P/N 12345739 (Canadian P/N 10953541) or equivalent to the intake manifold bolt threads before assembly.
By Bob
GM Specialist
01/11/2022Q: What's the installation procedure for the fuel injector sight shield?
A:
The installation procedure is to align the extension on the rear edge of the shield to the bracket on the rear of the engine, push the shield rearward and push down to align it with the oil filler hole, and install the oil filler neck.
By Bob
GM Specialist
01/11/2022Q: What's the removal procedure for the fuel injector sight shield?
A:
The removal procedure is to remove the oil filler neck, lift the front of the shield and pull towards the front of the vehicle and remove the fuel injector sight shield.
By Bob
GM Specialist
01/11/2022Q: Can I use a sealer on the gasket when installing the upper intake manifold?
A:
No, you cannot. You should not use any sealer on the gasket when installing the upper intake manifold.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the throttle body support bracket bolts?
A:
The recommended torque is 10 Nm (89-inch lbs.).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the engine wiring harness heat shield fasteners?
A:
The recommended torque is 10 Nm (89-inch lbs.).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the lower intake manifold bolts?
A:
The recommended torque is 15 Nm (11 ft. lbs.).
By Bob
GM Specialist
01/11/2022See more FAQs (2)