< Back ×
My Vehicle Change Vehicle
2002 Buick LeSabre
< Back to View All
Rocker Panels & Floors
- Department
- Prices
OEM (Genuine) 2002 Buick LeSabre Floor Pan
PartNumber: 22768930
Product Specifications- Other Names: Floor Pan, Rear Floor Pan
- Item Dimensions: 9.3 x 62.8 x 27.2 inches
- Item Weight: 48.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12481929, 15239831, 15921128, 25794678
- Part Description: 2002 Buick LeSabre Floor Pan
Vehicle Fitment- 2002 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
$170.45 MSRP:$268.07You Save: $97.62 (37%)
FAQ for Floor Pan Repair
Q: What's the installation procedure for the rear carpet?
A:
The installation procedure is to lay the rear carpet into the vehicle, install the rear carpet retainer, the rear seat cushion, the center console, and the front seats, and enable the SIR system.
By Bob
GM Specialist
29/10/2022Q: What should be noticed when using the GM Vehicle Care Odor Eliminator?
A:
This product leaves no residual scent and should not be used as an air freshener.
By Bob
GM Specialist
29/10/2022Q: What's the removal procedure for the rear carpet?
A:
The removal procedure is to disable the SIR system, and remove the front seats, the center console, the rear seat cushion, the rear carpet retainer, and the rear carpet.
By Bob
GM Specialist
29/10/2022Q: How to dry the floor carpet?
A:
If you observe puddles of liquid on the carpet face, use a wet vacuum to remove the excess moisture, blot the face of the carpet with a towel to absorb as much moisture as possible, and point a fan at the affected area and air dry the carpet.
By Bob
GM Specialist
29/10/2022Q: How to use the GM Vehicle Care Odor Eliminator?
A:
You can spray GM Vehicle Care Odor Eliminator directly or as an additive with carpet shampoo in steam cleaners, and do not use it on any interior surface that plain water would deteriorate, also avoid letting this product come into contact with vinegar or any acidic substance.
By Bob
GM Specialist
29/10/2022Q: What's the installation procedure for the carpet retainer?
A:
The installation procedure is to install the carpet retainer to the floor, snap the carpet retainer into place, and close the door.
By Bob
GM Specialist
29/10/2022Q: What's the removal procedure for the carpet retainer?
A:
The removal procedure is to open the door, unsnap the carpet retainer, then remove the carpet retainer from the floor.
By Bob
GM Specialist
29/10/2022Q: What's the removal procedure for the front carpet?
A:
The removal procedure is to disable the SIR system and remove the front seats, the front floor console, the carpet retainers, and the front carpet.
By Bob
GM Specialist
29/10/2022Q: What's the installation procedure for the front carpet?
A:
The installation procedure is to lay the front carpet into the vehicle, work the front edges of the carpet into place under the instrument panel, install the floor vent into the floor ducts, the center console, the carpet retainer, and the front seats, then enable the SIR system.
By Bob
GM Specialist
29/10/2022See more FAQs (4)