FAQ for Door Seal Repair
Q: What's the removal procedure for the rear door bottom sealing strip?
A:
The removal procedure is to remove the rear door bottom sealing strip retainers and the rear door bottom sealing strip.
By BobGM Specialist
01/11/2022 Q: How to install the weatherstrip and stationary window into the door?
A:
You can seat the stationary window into the door frame, and insert the window weatherstrip into the door frame.
By BobGM Specialist
01/11/2022 Q: How to remove the front door upper auxiliary weatherstrip?
A:
You will need to remove the upper door trim panel, and the outside rearview mirror, partially remove the window weatherstrip to access the upper auxiliary molding screws and remove the auxiliary weatherstrip screws then carefully peel the auxiliary weatherstrip away from the door header.
By BobGM Specialist
01/11/2022 Q: What should be done before removing the rear door upper auxiliary weatherstrip fasteners?
A:
You will need to remove the rear door stationary window.
By BobGM Specialist
01/11/2022 Q: What should be done before installing the door trim panel?
A:
You will need to install the door module.
By BobGM Specialist
01/11/2022 Q: How to remove the rear door opening weatherstrip?
A:
You will need to remove the sill plate, start at the rear upper corner of the door opening and pull the weatherstrip away from the door opening flange, work around the door opening and remove the weatherstrip.
By BobGM Specialist
01/11/2022 Q: What should be known when positioning the paint dot in the upper corner of the center pillar?
A:
One paint dot on the weatherstrip indicates the RH weatherstrip starting point, and two paint dots on the weatherstrip indicates the LH weatherstrip starting point.
By BobGM Specialist
01/11/2022 Q: What do the paint dots on the weatherstrip mean?
A:
One paint dot on the weatherstrip indicates the RH weatherstrip starting point, and two paint dots on the weatherstrip indicates the LH weatherstrip starting point.
By BobGM Specialist
01/11/2022 Q: How to remove the front door weatherstrip?
A:
You will need to remove the sill plate, start at the rear upper corner of the door opening and pull the weatherstrip away from the door opening flange then work around the door opening and remove the weatherstrip.
By BobGM Specialist
01/11/2022 Q: What's the removal procedure for the front door bottom sealing strip?
A:
The removal procedure is to remove the front door bottom sealing strip retainers with the door open, then remove the front door bottom sealing strip.
By BobGM Specialist
01/11/2022 See more FAQs (10)