< Back ×
My Vehicle Change Vehicle
2002 Buick LeSabre
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2002 Buick LeSabre Hinge
PartNumber: 25697789
Product Specifications- Location: Driver Side
- Other Names: Hinge
- Item Dimensions: 19.6 x 13.0 x 9.6 inches
- Item Weight: 4.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick LeSabre Hinge
Vehicle Fitment- 2002 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
$72.93 MSRP:$110.04You Save: $37.11 (34%)
OEM (Genuine) 2002 Buick LeSabre Hinge Asm, Front Side Door
PartNumber: 25709766
Product Specifications- Location: Passenger Side
- Other Names: Lower Hinge, Upper Hinge
- Item Dimensions: 4.2 x 3.4 x 3.2 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25695589, 25754599
- Part Description: 2002 Buick LeSabre Hinge Asm, Front Side Door
Vehicle Fitment- 2002 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick LeSabre Hinge Asm, Front Side Door
PartNumber: 25709767
Product Specifications- Location: Driver Side
- Other Names: Lower Hinge, Upper Hinge
- Item Dimensions: 8.6 x 4.3 x 2.6 inches
- Item Weight: 2.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 25754600, 25695590, 25693460
- Part Description: 2002 Buick LeSabre Hinge Asm, Front Side Door
Vehicle Fitment- 2002 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
OEM (Genuine) 2002 Buick LeSabre Hinge Asm-Rear Compartment Lid
PartNumber: 25697788Product Specifications- Location: Passenger Side
- Other Names: Hinge
- Item Dimensions: 21.5 x 15.8 x 12.9 inches
- Item Weight: 4.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2002 Buick LeSabre Hinge Asm-Rear Compartment Lid
Vehicle Fitment- 2002 Buick LeSabre | Custom, Limited | 6 Cyl 3.8 L GAS
FAQ for Door Hinge Repair
Q: What's the recommended torque for the hinge-to-body fasteners?
A:
The recommended torque is 35 N.m (26 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when removing the hinge to body fasteners?
A:
You will need to be careful to secure the stud plate within the door when removing the hinge half from the door. The stud plate is not attached to the door and could fall into the door.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the hinge body fasteners?
A:
The recommended torque is 35 N.m (26 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the hinge-to-door fasteners?
A:
The recommended torque is 34 N.m (24 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What should be noticed when removing the hinge half from the door?
A:
You will need to be careful to secure the stud plate within the door when removing the hinge half from the door. The stud plate is not attached to the door and could fall into the door.
By Bob
GM Specialist
01/11/2022Q: What's the recommended torque for the hinge door fasteners?
A:
The recommended torque is 34 N.m (24 lb-ft).
By Bob
GM Specialist
01/11/2022Q: What's the removal procedure for the front door anchor plate?
A:
The removal procedure is to remove the door striker, and the center pillar trim panel, and remove the anchor plate from the center pillar chute.
By Bob
GM Specialist
29/10/2022Q: What should be noticed when adjusting the door lock striker?
A:
You should not hit the striker with a hammer or force alignment in any other way. Failure to properly adjust the striker will result in excessive door efforts or extensive damage to door system operation which could result in personal injury.
By Bob
GM Specialist
29/10/2022Q: What should be noticed when adjusting the door locker striker?
A:
You should not hit the striker with a hammer or force alignment in any other way. Failure to properly adjust the striker will result in excessive door efforts or extensive damage to door system operation which could result in personal injury.
By Bob
GM Specialist
29/10/2022Q: What's the recommended torque for the striker fasteners?
A:
The recommended torque is 28 N.m (21 lb-ft).
By Bob
GM Specialist
29/10/2022See more FAQs (9)