Part Description: 2002 Buick LeSabre Camshaft Position Sensor
More Info
Vehicle Fitment
2002 Buick LeSabre | All Trims | All Engines
FAQ for Camshaft Position Sensor Repair
Q: What's the recommended torque for the camshaft position sensor retaining bolt?
A:
The recommended torque is 10 N.m (89 lb in).
By Bob
GM Specialist
01/11/2022
Q: How to remove the camshaft position sensor?
A:
You will need to remove the coolant recovery reservoir, and the drive belt, disconnect the electrical connector from the camshaft position sensor, remove the camshaft position (CMP) sensor retaining screw, then remove the CMP sensor from the engine front cover.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What's the recommended torque for the engine oil level sensor?
A:
The recommended torque is 20 Nm (15 ft. lbs.).
Q: What's the installation procedure for the engine oil pressure sensor and/or switch?
A:
The installation procedure is to install the engine oil pressure switch to the oil filter adapter using the J 41712, connect the electrical connector to the engine oil pressure switch, lower the vehicle, inspect for oil leaks after the engine starts up, and adjust the engine oil level to the full mark.
Q: How many attaching bolts need to be removed from the CKP sensor?