Part Description: 2001 GMC Yukon XL 1500 Power Window Regulator And Motor Assembly
Vehicle Fitment
2001 GMC Yukon XL 1500 | All Trims | All Engines
1-30 of 38 Results
< Previous
12
Next >
FAQ for Window Regulator Repair
Q: What is the removal procedure for the door window regulator (manual)?
A:
The procedure is to remove the trim panel and the water deflector, disconnect the wiring harness from the window motor assembly and remove the window regulator assembly from the door folding both sides together.
By Bob
GM Specialist
01/11/2022
Q: What is the installation procedure for the door window regulator (manual)?
A:
The procedure is to install the regulator to the door and the bolts to the window regulator, connect the wiring harness to the window motor assembly and install the water deflector and the trim panel.
By Bob
GM Specialist
01/11/2022
Q: How to remove the door window regulator (power)?
A:
The proper way is to remove the trim panel and the water deflector, disconnect the wiring harness from the window motor assembly and remove the window regulator assembly from the door folding both sides together, and the window regulator motor.
By Bob
GM Specialist
01/11/2022
Q: How to install the door window regulator (power)?
A:
The proper way is to install the window regulator motor and the regulator, connect the wiring harness to the window motor assembly, and install the water deflector and the trim panel.
By Bob
GM Specialist
01/11/2022
Q: How to remove the front side door window regulator motor?
A:
You shall remove the power window module, fasteners, and motor.
By Bob
GM Specialist
01/11/2022
Q: How to install the front side door window regulator motor?
A:
You shall install the motor, the fasteners, the power window module, and the window.
By Bob
GM Specialist
01/11/2022
See more FAQs (1)
FAQ for Other Repair Info
Q: How to remove the window regulator motor-front door?
A:
The proper way is to remove the door trim panel, the water deflector, and the door speaker, disconnect the wiring harness from the window regulator motor and remove the 3 bolts from the Window Motor, and the motor from the door regulator assembly.
Q: How to remove the power window switch-rear door?
A:
The procedure is to carefully pry the door power Window Switch from the door trim panel, and disconnect the electrical connector from the switch.