FAQ for Vehicle Speed Sensors Repair
Q: What should be learned about while servicing the flat wire?
A:
The flat wire within the flex wiring harness is not serviceable. If an open or short exists within the flex wiring harness the complete harness must be replaced.
By BobGM Specialist
01/11/2022 Q: How to install the Vehicle Speed Sensor (VSS)?
A:
The proper way is to install the O-ring on the vehicle speed sensor assembly, the vehicle speed sensor assembly, and the electrical connector to the vehicle speed sensor.
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for the vehicle speed sensor (VSS)?
A:
The procedure is to install the O-ring seal on the vehicle speed sensor, and the vehicle speed sensor into the transmission case, connect the wiring harness electrical connector to the vehicle speed sensor and refill the fluid as required.
By BobGM Specialist
01/11/2022 Q: How to install the speed sensor?
A:
You need to install a new O-ring and the new speed sensor on the speed sensor, and the speed sensor bolt, and reconnect the external wiring harness to the speed sensor.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the vehicle speed sensor (VSS)?
A:
The procedure is to remove the harness connector, the bolt, the vehicle speed sensor, and the O-ring seal.
By BobGM Specialist
01/11/2022 Q: How to remove the speed sensor?
A:
You need to turn the vehicle ignition off, disconnect the external wiring harness from the speed sensor, and remove the bolt from the speed sensor, and the speed sensor.
By BobGM Specialist
01/11/2022 Q: How to remove the vehicle speed sensor (VSS)?
A:
You need to disconnect the speed sensor connectors and remove the vehicle speed sensor bolts, the vehicle speed sensors, and the bracket assemblies from the case.
By BobGM Specialist
01/11/2022 See more FAQs (2)