Notes: All Models; W/O Power Windows; 2000-02, Door Lock
Location: Driver Side; Passenger Side
Other Names: Lock Switch, Switch
Item Dimensions: 3.2 x 2.1 x 1.1 inches
Item Weight: 0.40 Pounds
Fitment Type: Direct Replacement
Part Description: 2001 GMC Yukon XL 1500 Switch Asm-Door Lock
More Info
Vehicle Fitment
2001 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Door Lock Switch Repair
Q: What is the installation procedure for the door lock switch?
A:
The procedure is to install the power door lock and power window switch assembly, and the screws to the door lock switch, connect the electrical connector to the door lock switch and install the power accessory switch plate.
By Bob
GM Specialist
01/11/2022
Q: How to install the power door lock switch?
A:
The proper way is to install the power door lock and power window switch assembly, and the screws to the door lock switch, connect the electrical connector to the door lock switch, and install the power accessory switch plate.
By Bob
GM Specialist
01/11/2022
Q: How to remove the power door lock switch?
A:
The proper way is to remove the power accessory switch panel, disconnect the electrical connector from the door lock switch, and remove the power window and door lock switch from the switch panel.
By Bob
GM Specialist
01/11/2022
Q: What is the removal procedure for the door lock switch?
A:
The procedure is to remove the power accessory switch panel, disconnect the electrical connector from the door lock switch, remove the screws from the door lock switch, and the power window and door lock switch from the switch panel.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be learned about while servicing the door hinge pin and bushing-rear door?
A:
The Door Hinge pins and bushings are not replaceable. If the hinge pins or bushings are damaged, you shall replace the door hinge as an assembly.
Q: How to remove the rear side door lock actuator?
A:
The proper way is to remove the door trim panel and the water deflector, disconnect the inside door lock rod, the manual door lock rod, and the cylinder lock rod, and remove the Door Lock Actuator and control rods as an assembly.
Q: How to remove the door outside handle?
A:
You shall remove the trim panel, the water deflector, the outside handle rod, the lock cylinder rod, the rubber cover, the door lock cylinder, and the handle.