Part Description: 2001 GMC Yukon XL 1500 Cylinder Kit, Front Side Door Lock(Uncoded)
More Info
Vehicle Fitment
2001 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$121.87MSRP: $183.87
You Save: $62.00 (34%)
FAQ for Door Lock Cylinder Repair
Q: What is the proper way to install the door lock cylinder?
A:
The proper way is to install the lock cylinder, the clip, the outside door handle, the front door water deflector, and the front door trim panel.
By Bob
GM Specialist
01/11/2022
Q: What is the proper way to remove the door lock cylinder?
A:
The proper way is to remove the front door trim panel, the water deflector, the outside door handle, and the lock cylinder retainer.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What should be learned about while servicing the door hinge pin and bushing-rear door?
A:
The Door Hinge pins and bushings are not replaceable. If the hinge pins or bushings are damaged, you shall replace the door hinge as an assembly.
Q: How to remove the rear side door lock actuator?
A:
The proper way is to remove the door trim panel and the water deflector, disconnect the inside door lock rod, the manual door lock rod, and the cylinder lock rod, and remove the Door Lock Actuator and control rods as an assembly.
Q: What is the installation procedure for the door lock switch?
A:
The procedure is to install the power door lock and power window switch assembly, and the screws to the Door Lock Switch, connect the electrical connector to the door lock switch and install the power accessory switch plate.