FAQ for Battery Cables Repair
Q: How to remove the battery cable (negative)?
A:
The proper way is to remove the battery cable bracket bolt and bracket from the power steering pump, the negative cable clip from the positive cable clip, the engine wiring harness ground/negative cable bolts, the forward lamp wiring harness ground/negative cable bolt, and the negative battery cable.
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for the battery relay to the starter?
A:
The procedure is to install the auxiliary positive battery cable to the starter stud, the starter leads nut, the auxiliary positive battery cable to the auxiliary relay, and connect the auxiliary negative battery cable.
By BobGM Specialist
01/11/2022 Q: How to install the auxiliary battery negative cable?
A:
The proper way is to install the auxiliary negative battery cable, the engine sight shield, and the auxiliary battery cable clips to the studs at the front of the dash, and connect the auxiliary negative battery cable.
By BobGM Specialist
01/11/2022 Q: What is the removal procedure for the auxiliary battery?
A:
The procedure is to turn off all the lamps and accessories, turn the ignition OFF, and disconnect the battery ground (negative) cable and bolt from the battery.
By BobGM Specialist
01/11/2022 Q: What is the installation procedure for the single battery?
A:
The procedure is to connect the battery ground (negative) cable and bolt to the battery, set the clock to the current time, and program the customer's preferred radio stations.
By BobGM Specialist
01/11/2022 Q: How to remove the auxiliary battery negative cable?
A:
The proper way is to disconnect the auxiliary negative battery cable and remove the auxiliary battery cable clips from the studs at the front of the dash, the engine sight shield, the engine wiring harness/auxiliary negative battery cable bolt, and the auxiliary negative battery cable.
By BobGM Specialist
01/11/2022 Q: What should be cautioned about before servicing any electrical component?
A:
Unless directed otherwise, the ignition and start switch must be in the OFF or LOCK position, and all electrical loads must be OFF before servicing any electrical component, you shall disconnect the negative battery cable to prevent an electrical spark should a tool or equipment come in contact with an exposed electrical terminal.
By BobGM Specialist
01/11/2022 Q: How to install the battery cable (negative)?
A:
The proper way is to install the negative battery cable, the negative cable clip to the positive cable clip, and the negative cable clip to the positive cable clip.
By BobGM Specialist
01/11/2022 Q: What is the recommended torque for the starter lead nut?
A:
It is 25 N.m (18 lb-ft).
By BobGM Specialist
01/11/2022 Q: How to remove the auxiliary battery from the battery relay?
A:
The proper way is to remove the auxiliary battery, unclip the mega fuse from the auxiliary battery tray, and remove the auxiliary positive cable to the relay nut and the auxiliary battery positive cable.
By BobGM Specialist
01/11/2022 See more FAQs (10)