< Back ×
My Vehicle Change Vehicle
2001 GMC Yukon XL 1500
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2001 GMC Yukon XL 1500 Front Sensor
PartNumber: 15070580
Product Specifications- Other Names: Front Impact Sensor, Front Sensor
- Item Dimensions: 3.2 x 2.1 x 2.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Replaced by: 85598003
- Part Description: 2001 GMC Yukon XL 1500 Front Sensor
Vehicle Fitment- 2001 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$185.94 MSRP:$280.52You Save: $94.58 (34%)
OEM (Genuine) 2001 GMC Yukon XL 1500 Front Sensor
PartNumber: 16246305
Product Specifications- Item Dimensions: 4.3 x 2.3 x 2.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 GMC Yukon XL 1500 Front Sensor
Vehicle Fitment- 2001 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$309.91 MSRP:$467.54You Save: $157.63 (34%)
OEM (Genuine) 2001 GMC Yukon XL 1500 Module Asm-Inflator Restraint Side Imp Sensor
PartNumber: 16238629
Product Specifications- Notes: All Models;Side Air Bag
- Location: Driver Side; Passenger Side
- Other Names: Module, Side Impact Sensor, Side Sensor
- Item Dimensions: 4.3 x 2.2 x 2.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 GMC Yukon XL 1500 Module Asm-Inflator Restraint Side Imp Sensor
Vehicle Fitment- 2001 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for Air Bag Sensor Repair
Q: What is the installation procedure for the inflatable restraint IP module disable switch?
A:
The procedure is to connect the IP module switch electrical connector, install the IP module switch and the instrument panel trim bezel, and enable the SIR system.
By Bob
GM Specialist
01/11/2022Q: How to remove the front seat side impact inflator module?
A:
The proper way is to remove the front seat, the seat back cover, the inflatable restraint side impact module retainer, the inflatable restraint side impact module wiring harness retaining clips and wiring harness, and the inflatable restraint side impact module.
By Bob
GM Specialist
01/11/2022Q: What components should be replaced after a collision involving frontal airbag deployment?
A:
You shall replace the inflatable restraint front-end sensors, the inflatable restraint IP module, the inflatable restraint sensing and diagnostic module (SDM), the inflatable restraint side impact module if deployed, and the inflatable restraint steering wheel module.
By Bob
GM Specialist
01/11/2022Q: What components should you inspect?
A:
You shall inspect mounting points and mounting hardware for the side impact module and SDM, and the components indicated above in accident with or without airbag deployment.
By Bob
GM Specialist
01/11/2022Q: What should be learned about while servicing the inflator module?
A:
The rapid expansion of gas involved with deploying an inflator module is very loud. You shall notify all people in the immediate area that an inflator module will be deployed. When the inflator module deploys, the deployment fixture may jump vertically.
By Bob
GM Specialist
01/11/2022Q: What kind of tools will be required while servicing the inflator module?
A:
The tools required include J 38826 SIR Deployment Harness, J 39401-B SIR Deployment Fixture, and an appropriate pigtail adaptor.
By Bob
GM Specialist
01/11/2022Q: What should be noted when deploying an inflator module?
A:
The rapid expansion of gas involved with deploying an inflator module is very loud. You shall notify all people in the immediate area that an inflator module will be deployed.
By Bob
GM Specialist
01/11/2022Q: What should be noted when you are deploying an inflator module for disposal?
A:
When you are deploying an inflator module for disposal, you shall perform the deployment procedures in the order listed.
By Bob
GM Specialist
01/11/2022Q: Under what conditions should you deploy the inflator modules inside of the vehicle when destroying the vehicle or when salvaging the vehicle for parts?
A:
The vehicle has completed its useful life. Irreparable damage occurs to the vehicle in a non-deployment type accident. Irreparable damage occurs to the vehicle during a theft, and the vehicle is being salvaged for parts to be used on a vehicle with a different VIN as opposed to rebuilding as the same VIN.
By Bob
GM Specialist
01/11/2022Q: Under what kinds of conditions should you not deploy an inflator module?
A:
The module is under such condition as after the replacement of an inflator module under warranty, the vehicle which is the subject of a product liability report (GM-1241) related to the SIR system, and the vehicle which is involved in a campaign affecting the inflator modules.
By Bob
GM Specialist
01/11/2022See more FAQs (25)