< Back ×
My Vehicle Change Vehicle
2001 GMC Yukon XL 1500
< Back to View All
A/C & Heating
- Department
- Brands
- Prices
OEM (Genuine) 2001 GMC Yukon XL 1500 Clutch
PartNumber: 20906283
Product Specifications- Other Names: Clutch
- Item Dimensions: 11.6 x 7.5 x 4.5 inches
- Item Weight: 4.80 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12476085
- Replaced by: 85692946
- Part Description: 2001 GMC Yukon XL 1500 Clutch
Vehicle Fitment- 2001 GMC Yukon XL 1500 | Denali, SL, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
$156.02 MSRP:$292.41You Save: $136.39 (47%)
Four Seasons® A C Compressor Clutch for 2001 GMC Yukon XL 1500
PartNumber: 47362Product Specifications- Notes: w/ 10S20F Compressor; New; w/ Rear AC;w/ 10S17F Compressor; New; w/o Rear AC
- Belt Type: Serpentine
- Can Size: w/ Coil
- Clutch Maximum Diameter: 4.296875
- Coil: w/ Coil
- Coil Voltage: 12
- Color: Black
- Groove: 4
- Lead Wire : Lead Wires
- Material: Steel
- Meets / Exceeds OEM: Yes
- Mounting Type: Snap Ring
- Rotation: CCW-CW
- Style: 10S17F
- Thermal Or Non Thermal: NR
- UPC: 096361473621
- Part Description: 2001 GMC Yukon XL 1500 A C Compressor Clutch
Vehicle Fitment- 2001 GMC Yukon XL 1500 | All Trims | All Engines
$142.41
Four Seasons® A C Clutch Cycle Switch for 2001 GMC Yukon XL 1500
PartNumber: 37308Product Specifications- Notes: Pressure Switch
- Color: Black
- Connector Shape: Oval
- Fitting Gender: Female
- Fitting Thread Size: M12 x 1.50
- Item Included A Desc: 24676
- Item Included A Qty.: 1
- Material: Plastic / Metal
- Meets / Exceeds OEM: YES
- Mnt Sys Loc: System Mount
- Number of Terminals: 2
- Open (at 0 psi.): Yes
- Operate Psi Low Off: 25
- Operate Psi Low On: 44
- Style: Cycling
- Terminal Gender: Male
- Terminal Type: Pin
- UPC: 096361373082
- Voltage: 12
- Weather Pack: Yes
- Part Description: 2001 GMC Yukon XL 1500 A C Clutch Cycle Switch
Vehicle Fitment- 2001 GMC Yukon XL 1500 | All Trims | All Engines
$13.39
OEM (Genuine) 2001 GMC Yukon XL 1500 COIL
PartNumber: 6581632
Product Specifications- Notes: All Models
- Item Dimensions: 6.4 x 5.9 x 2.4 inches
- Item Weight: 2.00 Pounds
- Part Description: 2001 GMC Yukon XL 1500 COIL
Vehicle Fitment- 2001 GMC Yukon XL 1500 | Denali, SLE, SLT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
FAQ for A/C Clutch Repair
Q: What should be noticed while installing the clutch rotor and/or bearing (HT6/HD6/HU6)?
A:
You shall use care to prevent personal injury when striking the staking pin with a hammer.
By Bob
GM Specialist
01/11/2022Q: How to install the compressor clutch coil?
A:
The proper way is to install the coil assembly to the compressor, the coil snap ring, the coil connector retaining bracket screw, the clutch hub/bearing assembly, the clutch hub/bearing snap ring, the clutch plate assembly, and the clutch plate retaining bolt.
By Bob
GM Specialist
01/11/2022Q: What should be noticed while removing the clutch rotor and/or bearing (HT6/HD6/HU6)?
A:
It is not necessary to remove the staking in front of the bearing to remove the bearing, however, it will be necessary to file away the old stake metal for proper clearance for the new bearing to be installed or the bearing may be damaged.
By Bob
GM Specialist
01/11/2022Q: How to remove the compressor clutch coil (HT6/HD6/HU6)?
A:
The proper way is to remove the clutch plate and hub assembly, use the J 6083 to remove the pulley rotor and the bearing assembly retaining ring, and install the J 33023-A to the front head and the J 41552 down into the inner circle of slots in the rotor, turn the J 41552 clockwise in the slots in the rotor, hold the J41552 in position, remove the pulley rotor and bearing assembly, mark the clutch coil terminal location on the compressor front head, install the J 33023-A on the front head of the compressor, the J8433-1, and the J33025, and remove the clutch coil.
By Bob
GM Specialist
01/11/2022Q: What kind of tools will be required while installing the clutch rotor and/or bearing (HT6/HD6/HU6)?
A:
The tools required include J 6083 External Snap Ring Pliers, J 33023-A Puller Pilot, J 41552 Compressor Pulley Puller, J 29886 Driver Handle, J 21352-A Support Block, J 9481-A Bearing Installer, J 33019 Bearing Staking Tool, J 33017 Pulley and Bearing Assembly Installer, J 8433-1 Puller Bar, J 8433-3 Forcing Screw and J 34992 Compressor Holding Fixture.
By Bob
GM Specialist
01/11/2022Q: What kind of tools will be required in the replacement of the compressor clutch coil (HT6/HD6/HU6)?
A:
The tools required include J 33024 Clutch Coil Installer Adapter, J 8433-1 Puller Bar, J 8433-3 Forcing Screw, J 34992 Compressor Holding Fixture, J 33017 Pulley and Bearing Assembly Installer, J 33023-A Puller Pilot and J 6083 External Snap Ring Pliers.
By Bob
GM Specialist
01/11/2022Q: How to properly remove the compressor clutch plate and hub assembly (HT6/HD6/HU6)?
A:
The proper way is to clamp the J 34992 in a vise, use thumb screws to attach the compressor to the holding fixture, ensure that the center screw forces the tip to thrust against the end of the shaft, thread the J 33013-B into the hub, turn the center screw into the remover body to remove the clutch plate and hub assembly, and remove the shaft key.
By Bob
GM Specialist
01/11/2022Q: How to install the compressor clutch coil (Denso)?
A:
The proper way is to install the coil assembly to the compressor, the coil snap ring, the coil connector retaining bracket screw, the clutch hub/bearing assembly, the clutch hub/bearing snap ring, the clutch plate assembly, and the clutch plate retaining bolt.
By Bob
GM Specialist
01/11/2022Q: What kind of tools will be required while removing the clutch rotor and/or bearing (HT6/HD6/HU6)?
A:
The tools required include J 6083 External Snap Ring Pliers, J 33023-A Puller Pilot, J 41552 Compressor Pulley Puller, J 29886 Driver Handle, and J 9398-A Bearing Remover.
By Bob
GM Specialist
01/11/2022Q: How to remove the compressor clutch coil?
A:
The proper way is to remove the clutch plate retaining bolt, the clutch plate assembly, the clutch hub/bearing snap ring, the clutch hub/bearing assembly, the clutch coil connector bracket retaining screw, the clutch coil snap ring, and the clutch coil assembly.
By Bob
GM Specialist
01/11/2022See more FAQs (8)