< Back ×
My Vehicle Change Vehicle
2001 GMC Savana 1500
< Back to View All
Brake Dust Shields, Backing Plates & Brake Hardware
- Department
- Brands
- Prices
Wagner® Parking Brake Cable for 2001 GMC Savana 1500
PartNumber: BC140173Product Specifications- Notes: JB6 Brake System; 90" Length
- UPC: 008536421528
- Part Description: 2001 GMC Savana 1500 Parking Brake Cable
Vehicle Fitment- 2001 GMC Savana 1500 | All Trims | All Engines
$19.43
OEM (Genuine) 2001 GMC Savana 1500 Cable Asm-Parking Brake Front
PartNumber: 15076437
Product Specifications- Notes: Express, Savana
- Other Names: Front Cable
- Item Dimensions: 13.9 x 13.3 x 3.4 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 15963940
- Part Description: 2001 GMC Savana 1500 Cable Asm-Parking Brake Front
Vehicle Fitment- 2001 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
OEM (Genuine) 2001 GMC Savana 1500 Cable Asm-Parking Brake Intermediate
PartNumber: 15997316Product Specifications- Notes: Express, Savana
- Other Names: Intermediate Cable
- Item Dimensions: 13.7 x 13.5 x 3.5 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 GMC Savana 1500 Cable Asm-Parking Brake Intermediate
Vehicle Fitment- 2001 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
Wagner® Parking Brake Cable for 2001 GMC Savana 1500
PartNumber: BC140296Product Specifications- Notes: JB6 Brake System; 63" Length
- UPC: 008536422440
- Part Description: 2001 GMC Savana 1500 Parking Brake Cable
Vehicle Fitment- 2001 GMC Savana 1500 | All Trims | All Engines
Wagner® Parking Brake Cable for 2001 GMC Savana 1500
PartNumber: BC140843Product Specifications- UPC: 008536485957
- Part Description: 2001 GMC Savana 1500 Parking Brake Cable
Vehicle Fitment- 2001 GMC Savana 1500 | All Trims | All Engines
FAQ for Parking Brake Cable Repair
Q: What is the removal procedure for the park brake cable in the front?
A:
You need to install the pin into the park brake pedal, raise and suitably support the vehicle, loosen the cable at the cable adjuster, disconnect the front cable from the rear cables, remove the release handle and the cable, disconnect the front cable from the lever and the front cable from the lever retainer, and remove the rubber grommet and the front cable.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the park brake cable equalizer?
A:
You need to install the pin into the park brake pedal, raise and suitably support the vehicle, and remove the equalizer.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the park brake cable in the rear?
A:
You need to install the pin into the park brake pedal, raise and suitably support the vehicle, loosen the cable at the cable adjuster, disconnect the front cable, remove the rear brake shoes from the backing plate, disconnect the cable from the backing plate retainer, and remove the rear cable from the vehicle.
By Bob
GM Specialist
02/11/2022Q: How to install the park brake cable equalizer?
A:
You need to install the equalizer, remove the pin from the park brake pedal, lower the vehicle, and check the park brake adjustment.
By Bob
GM Specialist
02/11/2022Q: What specifications should we adjust the threads to?
A:
You should adjust the passenger/Cargo to 13 mm (0.511 inches) and the cutaway/Upfitters to 21 mm (0.826 inches).
By Bob
GM Specialist
02/11/2022Q: How to install the park brake cable in the rear?
A:
You need to install the rear cable to the vehicle, connect the rear cable to the backing plate retainer, install the rear brake shoes to the backing plate, connect the front cable to the rear cables, remove the pin, place the lever to the FULL up position, measure the threads of the equalizer, lower the vehicle, and verify that the vehicle will hold the position.
By Bob
GM Specialist
02/11/2022See more FAQs (1)