< Back ×
My Vehicle Change Vehicle
2001 GMC Savana 1500
< Back to View All
Air Filters & Intake Systems
- Department
- Brands
- Prices
Delphi® Throttle Body Idle Air Control Motor for 2001 GMC Savana 1500
PartNumber: CV10011Product Specifications- Gasket or Seal Included: Yes
- Housing Color: Silver
- Housing Material: Metal
- Installation Instructions Included: Yes
- Item Grade: Standard Replacement
- Terminal Gender: Male
- Terminal Quantity: 4
- Terminal Type: Pin
- UPC: 689604126455
- Part Description: 2001 GMC Savana 1500 Throttle Body Idle Air Control Motor
Vehicle Fitment- 2001 GMC Savana 1500 | All Trims | All Engines
$76.10
OEM (Genuine) 2001 GMC Savana 1500 Actuator
PartNumber: 17123852
Product Specifications- Notes: Express, Savana
- Other Names: Actuator, Throttle Position Sensor
- Item Dimensions: 2.9 x 2.8 x 1.2 inches
- Item Weight: 0.40 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 GMC Savana 1500 Actuator
Vehicle Fitment- 2001 GMC Savana 1500 | Base, LS, LT, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.3 L GAS, 8 Cyl 5.7 L GAS
$39.08 MSRP:$79.62You Save: $40.54 (51%)
FAQ for Idle Control Motor Repair
Q: What is the rest procedure for Idle Air Control (IAC) valve?
A:
The procedure is to turn on the ignition for 20 seconds, turn off the ignition for 10 seconds, start the engine, and check for the proper idle speed.
By Bob
GM Specialist
01/11/2022Q: How to install the Idle Air Control (IAC) valve?
A:
You need to measure the distance, lubricate the IAC valve O-ring, install the IAC valve assembly and the attaching screws, connect the IAC valve harness connector, install the engine cover, and reset the IAC valve pintle position.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Idle Air Control (IAC) valve?
A:
You need to turn off the ignition, remove the engine cover, disconnect the harness connector from the IAC valve, and remove the IAC valve attaching screws, the IAC valve assembly, and the O-ring.
By Bob
GM Specialist
01/11/2022Q: How to install the Idle Control Solenoid (ICS)?
A:
You need to position the solenoid and install the 2 mounting bolts, connect the fuel outlet hose and spring clamp, connect the fuel supply tube, connect the electrical connector, start the engine and use the J 41416 to inspect for leaks at each serviced fitting, and install the engine cover.
By Bob
GM Specialist
01/11/2022Q: What the PCM refers to determine the desired position of the IAC pintle at idle or during deceleration should?
A:
The engine RPM, the battery voltage, the air temperature, the Engine Coolant Temperature (ECT), the Throttle Position (TP) sensor angle, and the engine load The vehicle speed.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the Idle Control Solenoid (ICS)?
A:
You need to remove the engine cover, disconnect the fuel supply tube at the solenoid, remove the spring clamp and fuel outlet hose from the solenoid, disconnect the electrical connector, and remove the 2 solenoid mounting bolts.
By Bob
GM Specialist
01/11/2022See more FAQs (1)