< Back ×
My Vehicle Change Vehicle
2001 GMC Savana 1500
< Back to View All
Fuel Systems
- Department
- Capacity
- Brands
- Prices
Spectra Premium® Fuel Tank for 2001 GMC Savana 1500
PartNumber: GM58AProduct Specifications- Notes: 73" x 16-1/2" x 16-1/2"; 31 Gallons Midship Tank; Lock Ring Kit Incld
- Kit: LO91 (Included)
- Liter: 118.0
- Size: 73 x 16-1/2 x 16-1/2
- Strap Set: ST124 (Not Included)
- UPC: 671607936278
- US Gallon: 31.0
- Part Description: 2001 GMC Savana 1500 Fuel Tank
Vehicle Fitment- 2001 GMC Savana 1500 | All Trims | 6 Cyl 4.3L
- 2001 GMC Savana 1500 | All Trims | 8 Cyl 5.0L
- 2001 GMC Savana 1500 | All Trims | 8 Cyl 5.7L
$205.02
OEM (Genuine) 2001 GMC Savana 1500 Tank Asm-Fuel
PartNumber: 25311984
Product Specifications- Notes: Gas
- Other Names: Fuel Tank
- Item Dimensions: 75.6 x 15.9 x 12.2 inches
- Item Weight: 43.30 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 GMC Savana 1500 Tank Asm-Fuel
Vehicle Fitment- 2001 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
FAQ for Fuel Tank Repair
Q: What is the removal procedure for the fuel control solenoid (FCS)?
A:
You need to remove the engine cover, disconnect the low-pressure regulator reference line at the solenoid, remove the spring clamp and atmospheric reference hose from the solenoid, disconnect the electrical connector, and remove the 2 solenoid mounting bolts and the solenoid.
By Bob
GM Specialist
01/11/2022Q: How to install the fuel control solenoid (FCS)?
A:
You need to position the solenoid and install the 2 mounting bolts, connect the atmospheric reference hose and the spring clamp, the low-pressure regulator reference line, and the electrical connector, start the engine, inspect for leaks at each serviced fitting, and install the engine cover.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the clamp?
A:
The recommended torque is 2 Nm (18 lb in).
By Bob
GM Specialist
01/11/2022Q: How to install the fuel pressure gage?
A:
You need to place the fuel pressure gage bleed hose into an approved container and open the bleed valve to bleed off fuel system pressure, place a shop towel under the J 34730-1A to catch any remaining fuel spillage, remove the J 34730-1A, drain any fuel remaining in the fuel pressure gage into an approved container, inspect for leaks, and install the cap on the fuel pressure connection and the engine cover.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fuel mixer?
A:
You need to remove the air cleaner outlet duct and the retaining clamp, separate the fuel mixer housing, remove the fuel mixer retaining bolts, and separate the fuel mixer from the throttle body adapter.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fuel pressure gauge?
A:
You need to install the fuel pressure gauge to the fuel pressure service connection, turn on the ignition, place the bleed hose of the fuel pressure gauge into an approved gasoline container, open the bleed valve on the fuel pressure gauge to bleed the air, command the fuel pump on, close the bleed valve on the fuel pressure gauge, and inspect for fuel leaks.
By Bob
GM Specialist
01/11/2022Q: What is the removal procedure for the fuel system cleaning?
A:
You need to disconnect the negative battery cable, relieve the fuel system pressure, drain the fuel tank, remove the fuel tank and the fuel sender assembly, flush the fuel tank, pour the water out of the fuel sender assembly opening, and rock the tank to be sure that removal of water.
By Bob
GM Specialist
01/11/2022Q: How to install the fuel mixer?
A:
You need to install the fuel mixer into the throttle body adapter and the fuel mixer retaining bolts, attach the fuel mixer housing to the throttle body adapter and install the air cleaner outlet duct.
By Bob
GM Specialist
01/11/2022Q: How to inspect the in-line fuel filter?
A:
You need to inspect the in-line fuel filter for contamination and replace the fuel filter if the filter is plugged in.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the eight retaining bolts?
A:
The recommended torque is 24 Nm (18 lb-ft).
By Bob
GM Specialist
29/10/2022See more FAQs (7)