Part Description: 2001 GMC Savana 1500 OE Solutions Egr Tube
More Info
Vehicle Fitment
2001 GMC Savana 1500 | All Trims | 8 Cyl 5.0L
2001 GMC Savana 1500 | All Trims | 8 Cyl 5.7L
$97.43
FAQ for EGR Tube Repair
Q: What is the removal procedure for the exhaust gas recirculation (EGR) pipe?
A:
You need to remove the engine cover, the EGR pipe bracket retaining fastener, and the air cleaner outlet duct, loosen the pipe fittings at both ends of the EGR pipe and remove the EGR pipe.
By Bob
GM Specialist
01/11/2022
Q: How to install the exhaust gas recirculation (EGR) pipe?
A:
You need to install the EGR pipe in the proper location and start the pipe fittings, ensure that the EGR pipe fittings are correctly lined up on the adaptors to the exhaust and intake manifolds. Tighten the EGR pipe fitting, install the EGR pipe bracket retaining fastener, and reinstall the engine cover.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the EGR pipe bracket retaining fastener?
A:
The recommended torque is 25 Nm (18 lb-ft).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the exhaust gas recirculation (EGR) valve?
A:
You need to install the new flange gasket, the linear EGR Valve, the valve to flange bolts, the EGR valve harness connector, and the air cleaner assembly.
Q: What is the recommended torque for the AIR pump mounting bolt?
A:
The recommended torque is 17 Nm (13 lb-ft).
Q: What is the removal procedure for the evaporative emission (EVAP) canister purge valve?
A:
You need to disconnect the negative battery cable and the purge solenoid electrical connector and remove the purge solenoid retaining nuts and the purge solenoid from the intake manifold.