< Back ×
My Vehicle Change Vehicle
2001 GMC Savana 1500
< Back to View All
Brake Boosters & Brake Master Cylinders
- Department
- Prices
OEM (Genuine) 2001 GMC Savana 1500 Valve Kit, Power Brake Booster Vacuum Check
PartNumber: 18022219
Product Specifications- Notes: Vacuum Booster
- Item Dimensions: 4.1 x 2.0 x 2.1 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 18029764, 18021440, 18012017, 18020818, 18029792
- Part Description: 2001 GMC Savana 1500 Valve Kit, Power Brake Booster Vacuum Check
Vehicle Fitment- 2001 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
$21.64 MSRP:$42.94You Save: $21.30 (50%)
OEM (Genuine) 2001 GMC Savana 1500 Valve Kit, Brake Pressure Mod(Remanufacture)
PartNumber: 12475489
Product Specifications- Item Dimensions: 9.4 x 7.1 x 11.6 inches
- Item Weight: 9.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 12375048, 12548261
- Part Description: 2001 GMC Savana 1500 Valve Kit, Brake Pressure Mod(Remanufacture)
Vehicle Fitment- 2001 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
OEM (Genuine) 2001 GMC Savana 1500 Valve Kit, Brake Combination (Stamped E)
PartNumber: 12384466
Product Specifications- Notes: W/O 1 Ton
- Other Names: Pressure Metering Valve, Valve
- Item Dimensions: 8.1 x 5.3 x 4.2 inches
- Item Weight: 1.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 GMC Savana 1500 Valve Kit, Brake Combination (Stamped E)
Vehicle Fitment- 2001 GMC Savana 1500 | Base, SLE, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
FAQ for Brake Proportioning Valve Repair
Q: What is the recommended torque for the Allen bolts of the combination valve?
A:
The recommended torque is 8 Nm (6 ft. lbs.).
By Bob
GM Specialist
28/10/2022Q: What should be noticed when installing the combination valve?
A:
You should make sure that the metering rod of the combination valve is depressed during bleeding.
By Bob
GM Specialist
28/10/2022Q: What is the removal procedure for the combination valve?
A:
You need to raise and support the vehicle, remove the retaining bolts and the shield, disconnect the 2-way electrical connector from the combination valve and the front and rear brake pipes from the combination valve, remove the Allen bolts and the combination valve, and install the transfer tubes to the valve.
By Bob
GM Specialist
28/10/2022