2001 GMC Savana 1500 Brake Dust Shield

You need to install the pin into the park brake pedal, raise and suitably support the vehicle, loosen the cable at the cable adjuster, disconnect the front cable from the rear cables, remove the release handle and the cable, disconnect the front cable from the lever and the front cable from the lever retainer, and remove the rubber grommet and the front cable.

You need to lubricate the brake shoe backing plate, the adjusting screw threads, socket, and socket face, install the actuator lever and the lever pivot, the actuator lever return spring, the hold-down pins, the hold-down springs, the brake shoe guide, the brake shoe return springs, and the brake drum, remove the pin to the park brake lever, install the tire and wheel assembly, adjust the brakes, lower the vehicle, apply the brake pedal, and release the brake pedal.