2001 GMC Savana 1500 | Base, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
FAQ for Blower Control Switches Repair
Q: How to install the blower motor switch in the auxiliary (Front)?
A:
You need to install the switch into the bezel by snapping the switch into place, connect the electrical connector to the switch, and install the instrument cluster trim plate.
By Bob
GM Specialist
29/10/2022
Q: What is the removal procedure for the blower motor switch in the auxiliary (Front)?
A:
You need to remove the instrument cluster trim plate, disconnect the electrical connector from the switch, and remove the switch from the bezel by releasing the tabs on the side of the switch.
By Bob
GM Specialist
29/10/2022
FAQ for Other Repair Info
Q: How to install the blower motor resistor in the auxiliary?
A:
You need to install the Blower Motor Resistor to the blower case and the retaining screws, connect the electrical connector to the blower motor resistor, and install the left rear quarter trim panels.
Q: How to install the heater core in the auxiliary?
A:
You need to install the Heater Core to the case, the screws to the bottom of the auxiliary heater case, the auxiliary heater case, and the left rear quarter trim panel.
Q: How to install the heater pipe in the auxiliary front?
A:
You need to install the front inlet and outlet pipe, the retainers, the Heater Hose connections to the intermediate pipe, the heater hose connections, the heat shields, and the exhaust system, and fill the engine coolant.