< Back ×
My Vehicle Change Vehicle
2001 GMC Savana 1500
< Back to View All
Air Bag
- Department
- Prices
OEM (Genuine) 2001 GMC Savana 1500 Front Sensor
PartNumber: 16246305
Product Specifications- Item Dimensions: 4.3 x 2.3 x 2.3 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 GMC Savana 1500 Front Sensor
Vehicle Fitment- 2001 GMC Savana 1500 | Base, SLT | 6 Cyl 4.3 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
$309.91 MSRP:$467.54You Save: $157.63 (34%)
FAQ for Air Bag Sensor Repair
Q: What components should we replace when after a collision involving airbag deployment?
A:
You should replace the inflatable restraint front-end discriminating sensor, the inflatable restraint IP module, the inflatable restraint Sensing And Diagnostic Module (SDM), and the inflatable restraint steering wheel module.
By Bob
GM Specialist
01/11/2022Q: What should we inspect after any collision?
A:
You should perform the steering column accident damage checking procedures, inspect the I/P Knee Bolsters and Mounting Points, I/P brackets and braces, perform the seat belt operational and functional checks, and inspect seats and seat mounting points.
By Bob
GM Specialist
01/11/2022Q: What should we do before applying power to a sensor?
A:
You should remove any dirt, grease, etc. from the mounting surface, position the sensor horizontally on the mounting surface, and point the arrow on the sensor toward the front of the vehicle.
By Bob
GM Specialist
01/11/2022Q: What should be noticed if the vehicle has a SIR sensor mounted forward of the radiator?
A:
You should replace the sensor whether or not the airbags have deployed, and replace the sensor even if it appears to be undamaged.
By Bob
GM Specialist
01/11/2022Q: What is the disabling procedure for airbag(s) arming and disarming?
A:
The procedure is to turn the steering wheel, turn OFF the ignition, remove the key from the ignition, the AIR BAG Fuse from the IP fuse block, the driver knee bolster, and the Connector Position Assurance (CPA) from the steering wheel module yellow 2-way connector, disconnect the steering wheel module yellow 2-way connector, remove the passenger knee bolster, the CPA from the IP module yellow 2-way connector, disconnect the IP module yellow 2-way connector.
By Bob
GM Specialist
28/10/2022Q: What is the enabling procedure for the airbag(s) arming and disarming?
A:
You need to remove the key from the ignition, connect the IP module yellow 2-way connector, install the CPA and the passenger's knee bolster, connect the steering wheel module yellow 2-way connector, install the CPA to the steering wheel module yellow 2-way connector, the driver's knee bolster and the AIR BAG Fuse, turn ON the ignition, and perform the Diagnostic System Check - SIR.
By Bob
GM Specialist
28/10/2022See more FAQs (1)