2001 Chevrolet Venture Windshield Washer Hose

You need to route the rear washer hose along the right side of the vehicle, apply lubricant to the rear washer hose ends, then install the rear washer hose end through the opening in the dash panel, connect the rear washer hose to the washer solvent container, connect the rear washer hose end to the rear washer pump, and route the rear washer hose opposite end through the rear liftgate conduit, connect the rear washer hose to the rear washer nozzle, then position the rear washer nozzle to the liftgate, install the rear washer nozzle to the liftgate, install the wiper linkage cover, the rear hood seal, the liftgate trim panel, the rear lower quarter trim panel, then install the lower pillar garnish molding, and the right cowl trim panel.

You need to open the hood, remove the rear hood seal, and the wiper linkage cover, then disconnect the washer pump hose from the washer pump, from the washer hose tee-fitting, and the wiper motor, remove the washer pump hose, then remove the tee-fitting to wiper blade hoses.

First, you need to apply lubricant to the left and right wiper blade hose ends, next, connect the left wiper blade hose to the left wiper blade, and connect the left wiper blade hose to the tee-fitting, then install the left wiper blade hose to the air inlet grille panel, connect the right wiper blade hose to the right wiper blade, finally connect the right wiper blade hose to the tee-fitting.