< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Venture
< Back to View All
Power Steering Pumps
- Department
- Brands
- Prices
Cardone Reman® Remanufactured Power Steering Pump w/o Reservoir for 2001 Chevrolet Venture
PartNumber: 20-532Product Specifications- Notes: In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/o Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Inline Filter: With
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Reservoir: Without
- Thread Size: M16 x 1.5
- Part Description: 2001 Chevrolet Venture Remanufactured Power Steering Pump w/o Reservoir
Vehicle Fitment- 2001 Chevrolet Venture | All Trims | All Engines
$44.73
Cardone Reman® Remanufactured Power Steering Pump w/Reservoir for 2001 Chevrolet Venture
PartNumber: 20-57532Product Specifications- Notes: without Aftermarket Filtration Improvement;In-Line filter available;For warranty purposes it is recommended to always install a filter and to use suggested OE Fluid and flush the system;Supplied w/Reservoir
- Aftermarket Filtration: Without
- Attribute: With Reservoir
- Hose Port: O-Ring
- Housing Material: Cast Iron
- Import or Domestic: Domestic
- Mounting Hardware: Without
- Power Steering Reservoir Cap: Without
- Pulley: Without
- Pulley Attachment Type: Press-on
- Pump Inlet Attachment Type: Hose Barb
- Pump Outlet Attachment Type: Threaded
- Thread Size: M16 x 1.5
- Part Description: 2001 Chevrolet Venture Remanufactured Power Steering Pump w/Reservoir
Vehicle Fitment- 2001 Chevrolet Venture | All Trims | All Engines
$49.72
OEM (Genuine) 2001 Chevrolet Venture PUMP KIT, P/S
PartNumber: 19369069
Product Specifications- Notes: W/O Reservoir; All Models
- Other Names: Power Steering Pump
- Item Dimensions: 6.7 x 6.1 x 5.8 inches
- Item Weight: 6.30 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26086097, 10300182
- Part Description: 2001 Chevrolet Venture PUMP KIT, P/S
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
MAVAL® Remanufactured Power Steering Pump for 2001 Chevrolet Venture
PartNumber: 97144MProduct Specifications- Notes: Pulley needs to be transferred w/proper pulley removal/install toll.
- UPC: 843613120983
- Part Description: 2001 Chevrolet Venture Remanufactured Power Steering Pump
Vehicle Fitment- 2001 Chevrolet Venture | All Trims | All Engines
FAQ for Power Steering Pump Repair
Q: How to install the pulley?
A:
You need to use J25033-C to install the power steering pump pulley, install the power steering pump to the engine, install the drive belt, bleed the power steering system if the pump was removed, then inspect the system for leaks.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the power steering pump bolts?
A:
The recommended torque is 34 Nm (25 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the power steering pump flow control valve?
A:
You should install the flow control spring to the hydraulic pump housing assembly, install the control valve assembly, lubricate the O-ring seal with power steering fluid, then install the O-ring seal onto the O-ring union fitting, and install the O-ring union fitting into the hydraulic pump housing assembly.
By Bob
GM Specialist
01/11/2022Q: How to remove the power steering pump flow control valve?
A:
You need to remove the O-ring union fitting from the hydraulic pump housing assembly, remove the O-ring seal from the O-ring union fitting, then remove the control valve assembly, and the flow control spring.
By Bob
GM Specialist
01/11/2022Q: How to install the power steering pump?
A:
You need to install the reservoir to the pump, the power steering pump pulley, the pump to the vehicle, the power steering pump bolts, the return hose to the pump, the pressure hose to the pump, and install the drive belt, fill the power steering system, bleed the power steering system, then inspect the system for leaks.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the O-ring union fitting?
A:
The recommended torque is 75 Nm (55 ft. lbs.).
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required in the replacement of the pulley?
A:
The tools required include J37609-A Power Steering Pump Pulley Remover and J25033-C Universal Installer.
By Bob
GM Specialist
01/11/2022See more FAQs (2)