< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Venture
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2001 Chevrolet Venture Gate Asm-Lift
PartNumber: 15784021
Product Specifications- Other Names: Lift Gate
- Item Dimensions: 73.3 x 12.9 x 53.9 inches
- Item Weight: 79.50 Pounds
- Fitment Type: Direct Replacement
- Replaces: 89044563, 12369212
- Part Description: 2001 Chevrolet Venture Gate Asm-Lift
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Liftgates Repair
Q: How to remove the liftgate window?
A:
You need to remove the rear wiper arm, the rear wiper motor, and the liftgate trim panel, then disconnect the rear window defogger connector, use safety glasses and gloves, make a preliminary cut around the perimeter of the rear window, cut as close to edge of the rear window as possible, then cut the window from the pinch-weld flange, lift the liftgate window from the opening, remove the liftgate reveal molding from the edge of the window.
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required in the replacement of the liftgate window?
A:
The tools required include J 24402-A Glass Sealant Remover (Cold Knife), J 39032 Stationary Glass Removal Tool, Urethane Adhesive Kit GM P/N 12346392 or Equivalent, Isopropyl Alcohol or Equivalent, Cartridge-type Caulking Gun, Commercial-type Utility Knife, Razor Blade Scraper, Suction Cups, and Plastic Paddle.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the liftgate handle retaining bolts?
A:
The recommended torque is 10 N.m (89 LB IN).
By Bob
GM Specialist
01/11/2022Q: How to install the trim panel-liftgate?
A:
You need to align the 4-way and 2-way wedges on the liftgate trim panel to the wedges on the liftgate, align the liftgate trim panel studs to the holes in the liftgate, align the upper edge of the liftgate trim panel to the top center of the liftgate, install the upper edge of the liftgate trim panel to the top center of the liftgate, push on the liftgate trim panel in the four corners and center to secure the trim panel retainers, then install the liftgate pull strap, finally close the liftgate.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the liftgate pull strap?
A:
You should install the pull strap to the lift gate, and install the pull strap screws, finally close the liftgate.
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required when serving the trim panel liftgate?
A:
The tools required include J 38778 Door Trim Pad Clip Remover.
By Bob
GM Specialist
01/11/2022Q: How to remove the liftgate pull strap?
A:
You need to open the liftgate, remove the screws from the pull strap, then remove the pull strap from the liftgate.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the liftgate outside handle?
A:
You should install the liftgate latch cable to the liftgate handle, align the liftgate handle studs with holes in the liftgate, install the liftgate handle retaining bolts, install the liftgate handle retaining nuts to the studs, then install license plate lamp sockets by turning sockets clockwise, install the liftgate trim panel, finally close the liftgate.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the pull strap retaining screws?
A:
The recommended torque is 2 N.m (18 lb in).
By Bob
GM Specialist
01/11/2022Q: How to remove the liftgate outside handle?
A:
You need to open the liftgate, remove the liftgate trim panel, remove the license plate lamp sockets by turning the sockets counterclockwise, remove the liftgate handle nuts from the studs inside the liftgate, then remove the bolts from the liftgate handle, the liftgate latch cable from the handle, and remove the liftgate handle from the liftgate.
By Bob
GM Specialist
01/11/2022See more FAQs (5)