Part Description: 2001 Chevrolet Venture Cooling Fan Switch Connector
More Info
Vehicle Fitment
2001 Chevrolet Venture | All Trims | All Engines
$4.08
FAQ for HVAC Harness Connector Repair
Q: How to remove the O-ring?
A:
You need to recover the refrigerant, disconnect the A/C refrigerant line, then disconnect the A/C line from the A/C component, and cap or tape the A/C line and the A/C component to prevent system contamination, discard the O-ring seals.
By Bob
GM Specialist
01/11/2022
Q: What kind of special tools will be required in the replacement of the O-ring?
A:
The tools required include J 39400-A Halogen Leak Detector.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the ambient air temperature gage sensor?
A:
You should install the outside ambient Air Temperature Sensor, install the outside ambient air temperature sensor to the radiator support bolt, and connect the electrical connector to the outside ambient air temperature sensor.
Q: How to install the blower motor resistor assembly - auxiliary?
A:
You need to install the auxiliary Blower Motor Resistor to the auxiliary HVAC module assembly, next install the auxiliary blower motor resistor screws, connect the auxiliary blower motor resistor electrical connector, then install the accessory panel from the left rear quarter trim panel.
Q: How to install the heater case/cover?
A:
You need to install the Heater Core cover, the heater core cover retaining screws, the heater outlet duct, the heater outlet duct screws, the center console, the left IP insulator, and install the right IP insulator.