< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Venture
< Back to View All
Door Sheet Metal, Moldings & Weatherstrips
- Department
- Prices
OEM (Genuine) 2001 Chevrolet Venture Weatherstrip On Body
PartNumber: 10449199
Product Specifications- Notes: Long Wheelbase;Standard Wheelbase
- Location: Passenger Side
- Other Names: Door Weatherstrip, Weatherstrip On Body
- Item Dimensions: 4.8 x 17.9 x 17.6 inches
- Item Weight: 5.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10416831, 10443905, 10416829, 12493211, 12493209
- Part Description: 2001 Chevrolet Venture Weatherstrip On Body
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$105.60 MSRP:$151.76You Save: $46.16 (31%)
OEM (Genuine) 2001 Chevrolet Venture Weatherstrip On Body
PartNumber: 10449198
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Door Weatherstrip, Weatherstrip On Body
- Item Dimensions: 4.8 x 17.9 x 17.1 inches
- Item Weight: 5.10 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10443904, 10292525
- Part Description: 2001 Chevrolet Venture Weatherstrip On Body
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$107.21 MSRP:$154.08You Save: $46.87 (31%)
OEM (Genuine) 2001 Chevrolet Venture Lower Weatherstrip
PartNumber: 10383149
Product Specifications- Notes: Auxiliary
- Location: Driver Side; Passenger Side
- Other Names: Lower Weatherstrip, Weatherstrip
- Item Dimensions: 35.5 x 3.8 x 1.7 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Venture Lower Weatherstrip
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$13.06 MSRP:$18.75You Save: $5.69 (31%)
OEM (Genuine) 2001 Chevrolet Venture Inner Seal
PartNumber: 15238491
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Belt Weatherstrip, Inner Seal, Seal Strip
- Item Dimensions: 35.5 x 2.6 x 1.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10272862, 15194212
- Part Description: 2001 Chevrolet Venture Inner Seal
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$63.00 MSRP:$90.55You Save: $27.55 (31%)OEM (Genuine) 2001 Chevrolet Venture Weatherstrip On Body
PartNumber: 10449200
Product Specifications- Notes: Long Wheelbase;Standard Wheelbase
- Location: Driver Side
- Other Names: Door Weatherstrip, Weatherstrip On Body
- Item Dimensions: 4.8 x 18.3 x 17.1 inches
- Item Weight: 3.20 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10413159, 10413160, 10443906, 10416832, 10416830, 12493210
- Part Description: 2001 Chevrolet Venture Weatherstrip On Body
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$25.81 MSRP:$38.96You Save: $13.15 (34%)
OEM (Genuine) 2001 Chevrolet Venture Front Weatherstrip
PartNumber: 15889122
Product Specifications- Notes: Front
- Location: Driver Side; Passenger Side
- Other Names: Front Weatherstrip, Guard
- Item Dimensions: 19.2 x 7.5 x 1.4 inches
- Item Weight: 0.60 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10319687, 10295548, 10434329, 10332606, 10301715, 10315790, 15826990
- Part Description: 2001 Chevrolet Venture Front Weatherstrip
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$23.99 MSRP:$37.74You Save: $13.75 (37%)
OEM (Genuine) 2001 Chevrolet Venture Lower Seal Strip
PartNumber: 10232754
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Lower Seal Strip, Lower Weatherstrip
- Item Dimensions: 40.6 x 3.6 x 1.5 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Venture Lower Seal Strip
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$5.72 MSRP:$8.62You Save: $2.90 (34%)
OEM (Genuine) 2001 Chevrolet Venture Weatherstrip Asm-Front Side Door Rear Auxiliary
PartNumber: 10296294
Product Specifications- Location: Driver Side; Passenger Side
- Other Names: Rear Weatherstrip
- Item Dimensions: 25.8 x 1.9 x 0.7 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Venture Weatherstrip Asm-Front Side Door Rear Auxiliary
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$13.06
OEM (Genuine) 2001 Chevrolet Venture Weatherstrip-Rear
PartNumber: 16630666
Product Specifications- Notes: Rear Glass
- Location: Driver Side; Passenger Side
- Other Names: Rear Channel, Rear Weatherstrip, Weatherstrip
- Item Dimensions: 19.4 x 1.6 x 1.2 inches
- Item Weight: 0.50 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Venture Weatherstrip-Rear
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Door Seal Repair
Q: What is the proper way to install the sealing strip-font door auxiliary?
A:
You should warm the body panel with a heat lamp or heat gun to a minimum temperature of 21°C (70°F), peel the backing from the front end of the front door auxiliary weatherstrip, and do not touch the adhesive backing, press the front door auxiliary weatherstrip to the body as you continue to remove the backing, finally hand roll the front door auxiliary weatherstrip to the body to ensure proper adhesion.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the auxiliary weatherstrip?
A:
You should warm the body panel to a minimum of 21°C (70°F), peel the backing from the front end of the sliding door auxiliary weatherstrip, press the auxiliary weatherstrip to the body, then hand roll the rear side door auxiliary weatherstrip to the body to ensure proper adhesion, finally install the rear quarter window.
By Bob
GM Specialist
01/11/2022Q: What kind of special tools will be required when serving the sealing strip-door bottom?
A:
The tools required include J 38778 Door Trim Pad and Garnish Clip Remover.
By Bob
GM Specialist
01/11/2022Q: How to remove the front side door roof drip weatherstrip?
A:
You need to open the front door and the sliding side door, pull the front door roof drip rail weatherstrip from the pinch-weld flange, and clean all of the adhesive from the pinch-weld flange using 3M (TM) P/N 8984 adhesive remover or equivalent.
By Bob
GM Specialist
01/11/2022Q: How to remove the sealing strip-door bottom?
A:
You need to open the front door, then remove the front door bottom auxiliary weatherstrip from the front door.
By Bob
GM Specialist
01/11/2022Q: How to remove the weatherstrip-auxiliary
A:
You need to remove the rear quarter window, open the sliding rear door, use a heat gun to heat the sliding door auxiliary weatherstrip, use a flat-bladed tool to peel the sliding door auxiliary weatherstrip from the panel surface, then use oil-free naphtha or alcohol to clean the body panel.
By Bob
GM Specialist
01/11/2022Q: How to remove the weatherstrip-auxiliary?
A:
You need to open the sliding rear door, heat the sliding door auxiliary weatherstrip, keep the heat gun 150 mm (6 in) from the surface while heating, peel the sliding door auxiliary weatherstrip from the panel surface, and then clean the body panel.
By Bob
GM Specialist
01/11/2022Q: How to remove the weatherstrip-front door opening?
A:
You need to remove the front door opening sill plates, pull the front door opening weatherstrip from the front door pinch-weld flange, then clean all adhesive from the pinch-weld flange.
By Bob
GM Specialist
01/11/2022Q: How to remove the sealing strip-font door auxiliary?
A:
You need to use a heat gun to heat the front door auxiliary weatherstrip, use a plastic flat-bladed tool to peel the front door auxiliary weatherstrip from the panel surface, and do not damage the paint during removal of the auxiliary weatherstrip, then use oil-free naphtha to clean the body panel.
By Bob
GM Specialist
01/11/2022Q: What is the proper way to install the side door opening weatherstrip?
A:
You should install the sliding door opening weatherstrip to the sliding door pinch-weld flange, align the locator dot to the upper front corner and upper rear corners of the sliding door pinch-weld flange, then install the remainder of the sliding door opening weatherstrip, join the loose end of the front door opening weatherstrip to the seated end of the front door opening weatherstrip, then grasp the end of the tear strip at the joint and pull the entire length of the sliding door opening weatherstrip, finally inspect the sliding door opening weatherstrip for creases or wrinkles.
By Bob
GM Specialist
01/11/2022See more FAQs (10)