< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Venture
< Back to View All
Door Handles, Locks & Related Parts
- Department
- Prices
OEM (Genuine) 2001 Chevrolet Venture Lower Hinge
PartNumber: 10304605
Product Specifications- Location: Driver Side
- Other Names: Hinge, Lower Hinge
- Item Dimensions: 4.3 x 4.0 x 3.1 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Venture Lower Hinge
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$11.52 MSRP:$17.37You Save: $5.85 (34%)
OEM (Genuine) 2001 Chevrolet Venture Upper Hinge
PartNumber: 15782669
Product Specifications- Location: Driver Side
- Other Names: Hinge, Upper Hinge
- Item Dimensions: 5.5 x 5.1 x 4.5 inches
- Item Weight: 2.90 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10304601
- Part Description: 2001 Chevrolet Venture Upper Hinge
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
OEM (Genuine) 2001 Chevrolet Venture Lower Hinge
PartNumber: 10304604Product Specifications- Location: Passenger Side
- Other Names: Hinge, Lower Hinge
- Item Dimensions: 5.1 x 4.3 x 3.5 inches
- Item Weight: 3.10 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Venture Lower Hinge
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
OEM (Genuine) 2001 Chevrolet Venture Hinge Asm-Front Side Door Upper
PartNumber: 15782668Product Specifications- Location: Passenger Side
- Other Names: Hinge, Upper Hinge
- Item Dimensions: 4.3 x 4.1 x 3.2 inches
- Item Weight: 2.40 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10304600
- Part Description: 2001 Chevrolet Venture Hinge Asm-Front Side Door Upper
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
OEM (Genuine) 2001 Chevrolet Venture Hinge Asm-Lift Gate
PartNumber: 10395371
Product Specifications- Location: Driver Side; Passenger Side
- Item Dimensions: 8.5 x 5.1 x 4.7 inches
- Item Weight: 1.00 Pounds
- Fitment Type: Direct Replacement
- Replaces: 10400564
- Part Description: 2001 Chevrolet Venture Hinge Asm-Lift Gate
Vehicle Fitment- 2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for Door Hinge Repair
Q: What is the proper way to install the rear sliding door lock striker?
A:
You should install the sliding door striker and the shim to the C-pillar, then install the sliding door striker screws.
By Bob
GM Specialist
02/11/2022Q: How to remove the rear sliding door lock striker?
A:
You need to remove the sliding door striker screws, then remove the sliding door striker and the shim from the C-pillar.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the sliding door striker screws?
A:
The recommended torque is 25 N.m (18 lb-ft).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the upper or lower body side hinge bolts?
A:
The recommended torque is 33 N.m (24 lb-ft).
By Bob
GM Specialist
01/11/2022Q: How to install the hinge-front door?
A:
You need to install the cone adjuster bolt to the hinge, install the new hinge within the previously marked locations, install the upper or lower door side hinge bolts to the door and the hinge, remove the supports from the door, remove the reference tape from the door, the rocker, and the quarter panel, then inspect the front door for the adjustments: up and down, in and out, fore and aft, finally adjust the front door as needed.
By Bob
GM Specialist
01/11/2022Q: How to remove the front side door lock striker?
A:
You need to open the front door, scribe the location of the existing front door lock striker on the B-pillar with a grease pencil, and remove the front door lock striker screws, and the front door lock striker from B-pillar.
By Bob
GM Specialist
29/10/2022Q: What is the recommended torque for the front door lock striker screws?
A:
The recommended torque is 25 N.m (18 LB-FT).
By Bob
GM Specialist
29/10/2022See more FAQs (2)