2001 Chevrolet Venture ABS Wheel Speed Sensor

You need to clean the BPMV surface with alcohol, install the EBCM to the BPMV, install the four screws that attach the EBCM to BPMV, install the master cylinder to the brake booster, then install the master cylinder mount nuts, connect the EBCM harness connector, push down lock tab and then move sliding connector cover back in the home position to lock, and insert red locking tab back in place, install the air cleaner housing, turn the ignition switch to the RUN position, and finally perform the Diagnostic System Check-ABS.

You need to remove the rear wheels and tires, relieve the park brake system tension at the equalizer assembly, remove the rear caliper bracket, and the rear rotor, disconnect and remove the rear park brake cable from the bracket at the rear wheel, disconnect the park brake cable return spring from the park brake actuator and bracket at the rear wheel, remove the rear hub, remove the two retainers and the park brake cable bracket from the park brake actuator, remove the park brake shoe and actuator from the backing plate, and separate the park brake shoe from the actuator.