Part Description: 2001 Chevrolet Venture Fill Valve
More Info
Vehicle Fitment
2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
$31.56MSRP: $59.57
You Save: $28.01 (48%)
FAQ for A/C Service Adapter Repair
Q: What kind of special tools will be required when serving the service ports?
A:
The tools required include J 39037 Octagon Socket and J 39400-A Halogen Leak Detector.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the service port?
A:
The recommended torque is 11 N.m (98 lb in).
By Bob
GM Specialist
01/11/2022
Q: How to install the service ports?
A:
You need to install the service port, evacuate and recharge the refrigerant, leak test the fittings of the component using J 39400-A, then install the service port cap.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the ambient air temperature gage sensor?
A:
You should install the outside ambient Air Temperature Sensor, install the outside ambient air temperature sensor to the radiator support bolt, and connect the electrical connector to the outside ambient air temperature sensor.
Q: How to install the blower motor resistor assembly - auxiliary?
A:
You need to install the auxiliary Blower Motor Resistor to the auxiliary HVAC module assembly, next install the auxiliary blower motor resistor screws, connect the auxiliary blower motor resistor electrical connector, then install the accessory panel from the left rear quarter trim panel.
Q: How to install the heater case/cover?
A:
You need to install the Heater Core cover, the heater core cover retaining screws, the heater outlet duct, the heater outlet duct screws, the center console, the left IP insulator, and install the right IP insulator.