Other Names: AC Hose, Compressor & Condenser Hose, Suction Hose
Item Dimensions: 32.6 x 4.1 x 1.7 inches
Item Weight: 0.70 Pounds
Fitment Type: Direct Replacement
Part Description: 2001 Chevrolet Venture Hose Asm-A/C Compressor & Condenser
More Info
Vehicle Fitment
2001 Chevrolet Venture | Base, LS, LT, Plus, Value, Warner Bros. | 6 Cyl 3.4 L GAS
FAQ for A/C Condenser Repair
Q: What kind of special tools will be required in the replacement of the condenser?
A:
The tools required include J 39400-A Halogen Leak Detector.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the evaporator inlet tube fitting bolt?
A:
The recommended torque is 16 N.m (12 lb-ft).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the receiver dehydrator upper bracket bolts?
A:
The recommended torque is 6 N.m (53 lb in).
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: What is the proper way to install the ambient air temperature gage sensor?
A:
You should install the outside ambient Air Temperature Sensor, install the outside ambient air temperature sensor to the radiator support bolt, and connect the electrical connector to the outside ambient air temperature sensor.
Q: How to install the blower motor resistor assembly - auxiliary?
A:
You need to install the auxiliary Blower Motor Resistor to the auxiliary HVAC module assembly, next install the auxiliary blower motor resistor screws, connect the auxiliary blower motor resistor electrical connector, then install the accessory panel from the left rear quarter trim panel.
Q: How to install the heater case/cover?
A:
You need to install the Heater Core cover, the heater core cover retaining screws, the heater outlet duct, the heater outlet duct screws, the center console, the left IP insulator, and install the right IP insulator.