< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Metro
< Back to View All
Alternators, Batteries & Starters
- Department
- Condition
- Brands
- Prices
Denso® Remanufactured Starter for 2001 Chevrolet Metro
PartNumber: 280-4157Product Specifications- Notes: 0.8 kW; OE Equivalent
- Family: MITSUBISHI OE
- Internet Product Code (IPC): 67843AC69C6
- Item Grade: Standard Replacement
- Item has MSDS (SDS): N
- MFG Brand Name: DENSO Auto Parts
- MFG Model # (Series): 2804157
- MFG Name: DENSO
- New or Remanufactured: Remanufactured
- Over-Crank Protection: Non-Applicable
- Package Contents: Starter and installation instruction sheet
- Power Rating: 0.80
- Product Condition: Remanufactured
- Rated Kilowatts (kW): 1.4
- Starter Mounting Configuration: Bolt on
- Starter Rotation: Clockwise
- Starter Shims Included: No
- Starter Type: DD (Direct Drive)
- Supplier Company Name: DENSO
- UPC: 042511083370
- Vehicle System Voltage: 12V
- Voltage: 12.0
- Part Description: Remanufactured Starter
$64.50
Remy® Remanufactured Starter for 2001 Chevrolet Metro
PartNumber: 17093Product Specifications- Mounting Bolt Hole Quantity: 2
- New or Remanufactured: Remanufactured
- Nose Cone Type: Closed Nose
- OE Manufacturer: Mitsubishi
- Part Status: Superseded to 17752
- Power Rating (kW): 2
- Rotation Direction: Clockwise
- Unit Design: Permanent Magnet Planetary Gear Reduction
- Voltage [V]: 12
- Part Description: Remanufactured Starter
$62.84
Quality-Built® Starter Remanufactured for 2001 Chevrolet Metro
PartNumber: 17142Product Specifications- Design: Permanent Magnet Gear Reduction
- Manufacturer: Mitsubishi
- Power Rating: 1.4 kW
- Rotation: Clockwise
- Teeth: 8
- Volts: 12 V
- Part Description: Starter Remanufactured
$53.55
Quality-Built® Starter Remanufactured for 2001 Chevrolet Metro
PartNumber: 17270Product Specifications- Design: Direct Drive
- Manufacturer: Mitsubishi/Nippondenso
- Power Rating: 0.8 kW
- Rotation: Clockwise
- Teeth: 8
- Volts: 12 V
- Part Description: Starter Remanufactured
$62.22Quality-Built® Starter New for 2001 Chevrolet Metro
PartNumber: 17142NProduct Specifications- Design: Permanent Magnet Gear Reduction
- Manufacturer: Mitsubishi
- Power Rating: 1.4 kW
- Rotation: Clockwise
- Teeth: 8
- Volts: 12 V
- Part Description: Starter New
OEM (Genuine) 2001 Chevrolet Metro Motor Asm-Starter
PartNumber: 30005925
Product Specifications- Notes: Metro; Auto Trans; Auto Trans
- Other Names: Starter
- Item Dimensions: 8.5 x 6.6 x 4.7 inches
- Item Weight: 7.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: Motor Asm-Starter
FAQ for Starter Repair
Q: How to install the overrunning clutch retaining ring to the gear shaft assembly?
A:
You need to slide the overrunning clutch stop ring away from the overrunning clutch assembly to cover the overrunning clutch retaining ring.
By Bob
GM Specialist
02/11/2022Q: How to install the solenoid?
A:
You need to lightly lubricate the solenoid plunger, install the solenoid to the drive housing, install the 2 screws to the solenoid, the field coil lead wire and the nut to the solenoid, and the starter to the vehicle.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the starter motor assembly mounting bolts?
A:
The recommended torque is 23 Nm (17 lb-ft).
By Bob
GM Specialist
02/11/2022Q: How to install the starter motor?
A:
You need to remove the negative (-) battery cable from the battery, remove the retaining nut and the positive (+) battery cable from the starter solenoid, disconnect the solenoid electrical connector, and remove two mounting bolts and the starter motor assembly.
By Bob
GM Specialist
02/11/2022Q: What is the service procedure for the starter motor with a manual transaxle?
A:
You need to remove two bolts, two screws, and the end cover of the commutator from the yoke, remove the commutator end bushing and the washers from the yoke, scribe match marks on the yoke and the drive housing, remove the drive housing, the pinion drive lever, the armature, the brush holder, the brushes and the drive bushing, pull the armature stop ring toward the overrunning clutch assembly, remove the armature retaining ring, the armature stop ring, and the overrunning clutch assembly.
By Bob
GM Specialist
02/11/2022Q: What should we do if the plunger does not return quickly?
A:
If the plunger does not return quickly, you should replace the starter solenoid.
By Bob
GM Specialist
02/11/2022Q: What is the removal procedure for the solenoid?
A:
You need to remove the starter, and scribe match marks on the solenoid and the drive housing to ensure correct solenoid installation, remove the nut and the field coil lead wire from the solenoid, and the 2 screws and the solenoid from the drive housing.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the 2 screws to the solenoid?
A:
The recommended torque is 7 Nm (62 lb in).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the commutator end housing bolts?
A:
The recommended torque is 8 Nm (71 lb in).
By Bob
GM Specialist
02/11/2022See more FAQs (4)