2001 Chevrolet Metro Floor Pan

You need to disable the SIR system, remove the front seats, the plastic clips and the trim panel, remove the plastic clips and the trim panel, the front right sill plate, the front left sill plate, the lower, and rear quarter trim panels, the shifter boot, the shift control lever console, the 2 screws and the parking brake lever bezel, the lower anchor bolts of the front seat belt, the 4 plastic retainers that retain the carpet, the retainer that retains the instrument panel console bracket and the bracket, disconnect the connector of the inflatable restraint sensing and diagnostic module (SDM) and remove the passenger compartment floor carpet.

The recommended torque is 45 Nm (33 lb-ft).

You need to disable the SIR system, remove the front seat, the plastic clips and the trim panel, the plastic clips and the trim panel, the front right sill plate, the front left sill plate, the right rear sill plate, and the left rear sill plate, gently pry the lower trim panel and the lower trim panel, raise the rear seat cushion, remove the shifter boot, the shift control lever console, the parking brake lever bezel, the lower anchor bolts, and the 4 plastic retainers, disconnect the connector of the inflatable restraint sensing and diagnostic module (SDM), remove the retainer that retains the instrument panel console bracket, and remove the front floor carpet.