Part Description: 2001 Chevrolet Astro Lamp Asm-Parking & Turn Signal
More Info
Vehicle Fitment
2001 Chevrolet Astro | Base, CL, CS, LS, LT | 6 Cyl 4.3 L GAS
FAQ for Side Marker Lights Repair
Q: How to install the stepwell lamp?
A:
You need to install the bulb. Then you can install the lens to the body with the screw.
By Bob
GM Specialist
01/11/2022
Q: How to remove the stepwell lamp?
A:
You need to remove the screw that retains the lens. Then you can pry off the lens and pull out the bulb.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the starter motor?
A:
You need to connect the Starter motor field leads to the starter motor. Then you can install the two starter motor mounting bolts and the shims, lower the vehicle, and connect the battery negative cable.
Q: How to install the body control module?
A:
You need to install the Body Control Module and apply pressure on the center of the body control module. Then you need to connect the electrical connectors to the body control module and install the heater control and the radio. Next, you can perform the body control module programming and clear the diagnostic trouble codes (DTCs).
Q: How to install the cruise control module?
A:
You need to install the Cruise Control Module and the cruise control module bolts. After connecting the electrical connector, you can install the cruise control cable and perform the functional check.