< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Astro
< Back to View All
Power Steering Pumps
- Department
- Prices
OEM (Genuine) 2001 Chevrolet Astro Reservoir Asm, P/S Fluid
PartNumber: 26096798
Product Specifications- Notes: 2WD, Power Steering, 6 Cylinder, All; 4WD
- Other Names: Reservoir
- Item Dimensions: 7.9 x 6.8 x 6.8 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Replaces: 26043757
- Part Description: 2001 Chevrolet Astro Reservoir Asm, P/S Fluid
Vehicle Fitment- 2001 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS
FAQ for Power Steering Reservoir Repair
Q: What tools do you need to bleed the power steering system?
A:
You need to prepare the J 35555 metal mity vac and the J 43485 power steering bleeder adapter.
By Bob
GM Specialist
01/11/2022Q: What is the recommended torque for the bolts securing the power steering reservoir?
A:
The recommended torque is 4 Nm (35-inch lbs.).
By Bob
GM Specialist
01/11/2022Q: What kind of fluid can you use when removing the pump reservoir cap?
A:
You can only use clean, new power steering fluid.
By Bob
GM Specialist
01/11/2022Q: Can you lock the steering wheel while verifying the fluid level?
A:
You cannot turn the steering wheel to lock.
By Bob
GM Specialist
01/11/2022Q: How to install the remote power steering fluid reservoir?
A:
You need to install the power steering reservoir and the power steering reservoir mounting bolts. Then you can connect the power steering reservoir and the hydraulic brake booster hose. After that, you can bleed the power steering system.
By Bob
GM Specialist
01/11/2022Q: How to install the power steering reservoir?
A:
After lubricating the O-ring seals, you can install the control valve assembly and flow control spring to the pump housing assembly. Then you can install the O-ring seals and the magnet. After that, you can connect the reservoir assembly and install the O-ring seal.
By Bob
GM Specialist
01/11/2022Q: How to remove the remote power steering fluid reservoir?
A:
You need to place the drain pan under the vehicle and draw the fluid out of the reservoir. Then you need to disconnect the hydraulic brake booster hose and the power steering reservoir. After that, you can remove the power steering reservoir mounting bolts and the power steering reservoir.
By Bob
GM Specialist
01/11/2022Q: How to remove the power steering reservoir?
A:
You need to drain the power steering fluid and remove the pump mounting studs. Then you can remove the connector, the fitting assembly, the O-ring seal, the control valve assembly, and the flow control spring.
By Bob
GM Specialist
01/11/2022See more FAQs (3)