< Back ×
My Vehicle Change Vehicle
2001 Chevrolet Astro
< Back to View All
Interior & Exterior Trim
- Department
- Prices
OEM (Genuine) 2001 Chevrolet Astro Molding Asm-Front Side Door Lock Pillar Garnish *Neutral Medium
PartNumber: 15968678
Product Specifications- Notes: Passenger Side, 1996-05
- Location: Passenger Side
- Other Names: Pillar Trim
- Item Dimensions: 53.1 x 7.7 x 7.1 inches
- Item Weight: 1.60 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Astro Molding Asm-Front Side Door Lock Pillar Garnish *Neutral Medium
Vehicle Fitment- 2001 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS
OEM (Genuine) 2001 Chevrolet Astro Molding Asm-Front Side Door Lock Pillar Garnish <Use 1C4N*Neutral
PartNumber: 15020741
Product Specifications- Notes: Driver Side, 1996-05
- Location: Driver Side
- Other Names: Pillar Trim
- Item Dimensions: 21.4 x 11.6 x 4.4 inches
- Item Weight: 2.20 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Astro Molding Asm-Front Side Door Lock Pillar Garnish <Use 1C4N*Neutral
Vehicle Fitment- 2001 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS
OEM (Genuine) 2001 Chevrolet Astro Molding Asm-Front Side Door Lock Pillar Garnish *Graphite)(Pa
PartNumber: 15606777
Product Specifications- Notes: Driver Side, 1996-05
- Other Names: Pillar Molding, Pillar Trim
- Item Dimensions: 50.0 x 9.9 x 4.6 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Astro Molding Asm-Front Side Door Lock Pillar Garnish *Graphite)(Pa
Vehicle Fitment- 2001 Chevrolet Astro | Base, CL, CS, LS, LT | 4 Cyl 2.5 L GAS, 6 Cyl 4.3 L GAS
OEM (Genuine) 2001 Chevrolet Astro Molding-Body Rear Corner Garnish *Paint To Mat*Graphite)(Pa
PartNumber: 15628879
Product Specifications- Notes: Driver Side, 1996-05
- Location: Driver Side
- Other Names: Rear Pillar Trim
- Item Dimensions: 48.3 x 8.9 x 3.1 inches
- Item Weight: 0.70 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Astro Molding-Body Rear Corner Garnish *Paint To Mat*Graphite)(Pa
Vehicle Fitment- 2001 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS
OEM (Genuine) 2001 Chevrolet Astro Molding-Body Rear Corner Garnish R.H. *Paint T*Graphite)(Pa
PartNumber: 15628880
Product Specifications- Notes: Passenger Side, 1996-05
- Location: Passenger Side
- Other Names: Rear Pillar Trim
- Item Dimensions: 41.6 x 8.3 x 5.1 inches
- Item Weight: 0.80 Pounds
- Fitment Type: Direct Replacement
- Part Description: 2001 Chevrolet Astro Molding-Body Rear Corner Garnish R.H. *Paint T*Graphite)(Pa
Vehicle Fitment- 2001 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS
FAQ for Pillar Panels Repair
Q: What is the recommended torque for the bolts securing the garnish molding?
A:
The recommended torque is 2 Nm (18 lb.in.).
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the bolts securing the stepwell lamp cover?
A:
The recommended torque is 2 Nm (18 lb.in.).
By Bob
GM Specialist
02/11/2022Q: What tools do you need to replace the body side front upper trim panel?
A:
You need to prepare the J 38778 door trim pad and the garnish clip remover.
By Bob
GM Specialist
02/11/2022Q: How to remove the fourth pillar trim?
A:
After opening the rear door, you can remove the screws from the panel in the rear door opening, release the fasteners that retain the panel to the vehicle, and disconnect the speaker electrical connector.
By Bob
GM Specialist
02/11/2022Q: What tools do you need to replace the body side trim panel?
A:
You need to prepare the J 38778 door trim pad and the garnish clip remover.
By Bob
GM Specialist
02/11/2022Q: How to remove the side door opening frame garnish molding?
A:
You need to remove the garnish molding screw, the door opening garnish molding on the retainers, and the molding from one retainer. Then you can slide the molding.
By Bob
GM Specialist
02/11/2022Q: How to remove the body side front lower trim panel?
A:
You need to remove the intermediate seat and the driver's door stepwell lamp cover retaining screw. Then you can remove the stepwell lamp assembly and the body side front lower trim panel.
By Bob
GM Specialist
02/11/2022Q: How to remove the center pillar garnish molding?
A:
You need to remove the retaining screw from the garnish molding and the driver's side seat belt upper mounting bolt. Then you can pull back on the garnish molding and remove the garnish molding from the pillar.
By Bob
GM Specialist
02/11/2022Q: How to install the third pillar trim?
A:
You need to install the panel on the vehicle. Then you can install the retaining screw and install the seat belt upper mount.
By Bob
GM Specialist
02/11/2022Q: What is the recommended torque for the bolts securing the panel to the door?
A:
The recommended torque is 2 Nm (18 lb.in.).
By Bob
GM Specialist
02/11/2022See more FAQs (57)