2001 Chevrolet Astro Door Lock Cylinder

You need to remove the trim panel, the access cover, the Water Deflector, and the control rod from the outside handle. Then you can remove the outside handle nuts and the outside handle, disconnect the license lamp wiring, and remove the license plate housing bolts. Then you can remove the license plate housing and the door lock shield. After that, you can remove the control rod, the lock cylinder retainer, and the lock cylinder.

The recommended torque is 7 Nm (62 lb.in.).

You need to install the clip, the lock cylinder, the lock cylinder retainer, the control rod, the door lock shield, the license plate housing, the license plate housing bolts, and the license lamp bolts. Then you can install the clip, the outside handle, the outside handle nuts, the control rod, the water deflector, and the trim panel.

You need to install the gasket, the lock cylinder, the lock cylinder retainer, the lock rod, and the handle. Then you can install the nuts, the door handle lock rod, the access hole plug, and the water deflector. After that, you can install the trim panel.

You need to remove the trim panel and separate the water deflector at the perforations. Then you can remove the access hole plug, the lock rod from the door handle, the nuts from the door handle, the door handle from the door, the lock rod from the lock cylinder, the lock cylinder retainer, the lock cylinder, and the gasket.