Part Description: 2001 Chevrolet Astro Rear Door Latch Assembly
More Info
Vehicle Fitment
2001 Chevrolet Astro | Base, LS, LT | 6 Cyl 4.3 L GAS
FAQ for Door Latch Assembly Repair
Q: How to remove the rear door latch?
A:
You need to remove the trim panel and separate the weatherstrip deflector at the perforation. Then you need to remove the control rod, the bolts, the reinforcement, the latch, the rod, and the retainer.
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the bolts securing the upper latch?
A:
The recommended torque is 10 Nm (88 lb.in.).
By Bob
GM Specialist
01/11/2022
Q: What is the recommended torque for the bolts securing the door?
A:
The recommended torque is 8 Nm (71 lb.in.).
By Bob
GM Specialist
01/11/2022
Q: How to install the rear door latch?
A:
You need to install the control rod and the retainer to the latch. Then you can install the latch and the bolts. Then you need to install the water deflector and the trim panel.
By Bob
GM Specialist
01/11/2022
FAQ for Other Repair Info
Q: How to install the door switch?
A:
You need to install the Door Jamb Switch to the vehicle. Then you can connect the electrical connectors to the door jamb switch and tighten the nut on the door jamb switch.
Q: How to install the door lock actuator?
A:
You need to install the actuator and connect the power Door Lock Actuator wiring harness. Then you can install the power door lock actuator, the water deflector, and the trim panel.
Q: How to install the striker?
A:
You need to install the nut plate, the washer, and the spacer. Then you can install the striker and the striker bolts.